542820
19
Zoom out
Zoom in
Previous page
1/29
Next page
36 37
10. RESET THE STOPWATCH
First press SIGNAL/LIGHT until you see the stopwatch displayed in the
upper row. Press SET/START/STOP to stop the stopwatch. Then press and
hold SET/START/STOP until all stopwatch digits are back to zero. Release
the button. The current file is deleted and you can start the stopwatch and
begin recording again.
11. RESET THE CYCLING INFORMATION
The following cycling information is cumulative exercise by exercise:
- trip
- average speed
- maximum speed
If you like to measure cycling information for some particular
exercise, you must reset these values before starting the stopwatch.
Select the value, which you want to reset by pressing SIGNAL/LIGHT. Then
press and hold SET/START/STOP until the digits are back to zero.
12. SWAP BETWEEN CYCLING MODE AND HEART RATE MODE
Press SET/START/STOP and SIGNAL/LIGHT simultaneously to enter the
Heart rate mode within the same file. The total exercising time continues
running uninterrupted.
13. STOP THE CYCLING MODE
YOU HAVE THE FOLLOWING TWO ALTERNATIVES TO STOP:
1. To stop the Cycling mode and continue directly by recalling the
recorded training information:
Press SET/START/STOP to stop the stopwatch.
Press SELECT.
FILE is flashing in the uppermost row of the display.
The front pages of the recorded file alternate on the display.
Recalling the training information.
2. To stop the Cycling mode and enter the Time of day display:
Press SELECT three times.
8. START RECOVERY CALCULATION
1. At the end of the exercise press SET/START/
STOP to stop the stopwatch.
Heart rate measurement continues.
Display is illuminated for a few
seconds.
2. Press STORE/LAP/RECOVERY to start the
recovery calculation.
RECO appears in the upper row of
the display.
The previously set time for recovery
starts the countdown.
You will hear two beeps when the time for the
Recovery calculation is up.
The following display will appear for a few
seconds:
RECO
Drop in your heart rate during the preset
time.
Quick way
to start the recovery calculation:
When the stopwatch is running press
and hold STORE/LAP/RECOVERY until
you hear a beep signal. Release the
button.
To be able to start the Recovery calculation you need to set it first.
Setting the time for recovery heart rate.
9. START THE TIMERS
Timers start running automatically once you start the stopwatch. Timers
alternate in the following order: Timer 1, Timer 2, Timer 1, Timer 2 etc.
Timers stop running when you stop the stopwatch.
PROXT GBR/E 7.2.2001, 09:0136-37
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar PROTRAINER XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar PROTRAINER XT in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info