19
1. Go to General Settings > Pair and sync > Pair other device and press START.
2. M460 starts searching for your heart rate sensor.
3. Once the heart rate sensor is found, the device ID, for example, Pair Polar H10xxxxxxxx, is displayed.
Choose the heart rate sensor you want to pair.
4. Press START, Pairing is displayed.
5. Pairing completed is displayed when you are done.
or
1. Press START in time view to enter pre-training mode.
2. To pair, touch your sensor with M460 is displayed, touch your heart rate sensor with M460, and wait for it
to be found.
3. M460 lists the heart rate sensors it finds.The device ID, for example, Pair Polar H10xxxxxxxx, is displayed.
Choose the heart rate sensor you want to pair and then choose Yes.
4. Pairing completed is shown when you are done.
POLAR LOOK KÉO POWER SENSOR
BLUETOOTH
® SMART
With Polar LOOK Kéo Power, you can truly develop your cycling performance and technique. Perfect for ambitious cyc-
lists, this system uses Bluetooth® Smart technology and consumes only a little energy.
• Measures your power output (in Watts) and force (in Newton).
• Easy to set up and switch between bikes.
• M460 shows your power output in Watts, Watts/kg or % of FTP (functional threshold power).
• M460 shows your left/right balance and current, average and maximum cadence.
Kéo Power Bluetooth® Smart set includes two pedals and two power transmitters.
Kéo Power Essential Bluetooth® Smart is an economical choice for basic power measurement. It measures your
power output and force with the left hand pedal and provides your total power/force by multiplying the meas-
urement by two. The set includes two pedals and one power transmitter.
PAIR KÉO POWER WITH M460
Before pairing Kéo Power make sure you have installed it correctly. For information on mounting the pedals and
installing the transmitters see the Polar LOOK Kéo Power user manual that came in the product box, or the video
tutorial.
If you have two power transmitters, you need to pair the transmitters one at a time. After pairing the first transmitter,
you can immediately pair the second one. Check the device ID on the backside of each transmitter to make sure you
find the correct transmitters from the list.
There are two ways to pair Keó Power with your M460:
1. Go to General Settings > Pair and sync > Pair other device and press START.
2. Rotate the cranks to wake up the transmitters. M460 starts searching for Kéo Power.
3. Once the it is found, Polar PWR xxxxxxxx is displayed.
