542767
10
Zoom out
Zoom in
Previous page
1/22
Next page
5. INSTALL PEDALS
Carefully read all these instructions before use to
get the best out of the product. The specifications
may be changed without notice when
improvements are made in this product.
To install the pedals, you will need a thin 18 mm
wrench, an 8 mm Allen key and the pedal
installation tool (provided in product package).
Kéo Power pedals are standard 9/16 x 20 BSA
threading. Check that your cranks have the same
threading before installing the pedals.
The right pedal screws onto the crank clockwise.
The left pedal, marked with a groove on the pedal
bolt, screws onto the crank counterclockwise.
Make sure the crank thread and face in contact
with the pedal axle and bolt are clean before
installing the pedals. If they are not clean, the
pedal axle may be damaged during installation.
Also, check that the ring in front of the pedal bolt
is in place.
1. Screw the pedal onto the crank. Make sure to
screw it as far as it goes but do not tighten it.
2. Unscrew the pedal so that the mark on the
pedal axle points forward when the crank is
facing up (picture 1 on page 10). If the pedal
axle sticks out of the inside of the crank, put an
additional ring (included in package) between
the crank and the pedal bolt.
3. Place the pedal installation tool into the pedal
axle so that its shaft is in line with the crank
(picture 2 on page 10).
4. Hold the pedal installation tool in place, and
tighten the pedal bolt with a thin 18 mm
wrench. The recommended tightening torque is
30 Nm.
Kéo power pedals are designed to be compatible
with cranks less than 16 mm thick. If your cranks
are thicker, you may not be able to attach the
transmitters to the pedals.
ENGLISH
10 Install Pedals
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar LOOK Keo Power at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar LOOK Keo Power in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polar LOOK Keo Power

Polar LOOK Keo Power User Manual - German - 23 pages

Polar LOOK Keo Power User Manual - Dutch - 22 pages

Polar LOOK Keo Power User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info