464046
16
Zoom out
Zoom in
Previous page
1/22
Next page
or 3-6 miles per week or spend 1-3 hours per week in comparable physical activity, or your work
requires modest physical activity.
4. LOW (0-1 hours per week): You do not participate regularly in programmed recreational sport or heavy
physical activity, e.g. you walk only for pleasure, or exercise hard enough to cause heavy breathing or
perspiration only occasionally.
OwnIndex (VO
2max
): When you perform the Polar Fitness Test, your OwnIndex value is shown as a default.
Change the default value only if you know your laboratory-measured VO
2max
value.
General Settings
Select Settings > General settings .
Button sounds: Select Off, Soft, Loud or Very loud.
Button lock: Select Manual lock or Automatic lock.
Automatic lock: The training computer automatically locks all the buttons except LIGHT during training.
You can switch the button lock off by pressing and holding LIGHT until Buttons unlocked is displayed.
Manual lock: To lock buttons manually, press and hold LIGHT and confirm with OK. To unlock press
LIGHT until Buttons unlocked is displayed.
Units: Select Metric (kg/km) or Imperial (lb/ft). By selecting lb/ft, calories are displayed as Cal,
otherwise they are shown as kcal.
Language: Select Deutsch, English, Español, Français, Italiano, Português or Suomi.
Accessory Settings
Footpod Calibration*
Calibrate Foot Pod during training (on-the-fly calibration)
Make sure the foot pod function in the Polar FT60 is on. Select Settings > Training settings > Speed
sensor > Footpod and press OK.
To calibrate the footpod during training, choosing either alternative:
1. Stop running, stand still, and press and hold LIGHT to go to Quick menu.
OR
2. Stop running, stand still, and press BACK once.
Select Calibrate footpod. Fix the displayed distance with the actual distance you just run, and press OK.
Calibration factor set! is displayed. The foot pod is now calibrated and ready for action.
Set Calibration Factor Manually
There are two options for setting the calibration factor manually:
1. Before training: Select Settings > Training settings > Footpod calib. factor. Set the calibration factor
and press OK. The foot pod is now calibrated.
2. After starting heart rate measurement and before training recording: In the time mode, press OK and then
select Training settings > Footpod calib. factor. Set the calibration factor and press OK. The foot pod is
now calibrated. To start training recording press BACK once and then select Start.
*Optional S1 foot pod required.
ENGLISH
16 Settings
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar FT 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar FT 60 in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polar FT 60

Polar FT 60 User Manual - German - 48 pages

Polar FT 60 User Manual - Dutch - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info