464060
55
Zoom out
Zoom in
Previous page
1/70
Next page
11. USING A NEW ACCESSORY
Using a New Accessory
A new sensor purchased as a separate accessory has to be introduced to the cycling computer. This is
called teaching and takes only a few seconds. Teaching ensures that your cycling computer receives
signals from your sensor only, and enables disturbance-free exercise in a group. If you have purchased the
sensor and the cycling computer as a set, the sensor has already been “taught” to work together with the
cycling computer. You just need to activate the sensor in your cycling computer.
You can teach one Speed, Cadence and Power sensor for each bike setting.
Teaching a New Speed Sensor
Select Settings > Bike > Bike1/2/3 > Speed > On/Off.Teach new sensor? is displayed
To teach a new sensor, make sure you are not near (40 m/131 ft) other Speed sensors. Then select Yes to
confirm teaching. Start test drive is displayed. Rotate the wheel a few times to activate the sensor. A
flashing red light indicates that the sensor is activated. Completed!! is displayed once the teaching process
is over. The cycling computer is now ready to receive speed and distance data.
Select No to cancel teaching and the already earlier taught speed sensor is taken into use.
Once the speed sensor is taught to recognize the cycling computer, it will do so even if the sensor has been turned
off. When the speed sensor is turned back on Teach new sensor? is displayed. Select NO. If YES is selected, the
monitor goes into teaching mode.
For a video tutorial, go to http://www.polar.com/en/polar_community/videos.
Teaching a New Cadence Sensor*
Select Settings > Bike > Bike1/2/3 > Cadence > On/Off. Teach new sensor? is displayed
To teach a new sensor, make sure you are not near (40 m/131 ft) other Cadence sensors. Then select Yes
to confirm teaching. Start test drive is displayed. Rotate the wheel a few times to activate the sensor. A
flashing red light indicates that the sensor is activated. Completed!! is displayed once the teaching process
is over. The cycling computer is now ready to receive cadence data.
Select No to cancel teaching. The cycling computer will not be able to measure cadence data.
Once the cadence sensor is taught to recognize the cycling computer, it will do so even if the sensor has been
turned off. When the cadence sensor is turned back on next time, Teach new sensor? is displayed. Select NO
and the monitor will go into On/Off mode. Select ON to activate the cadence sensor. If YES is selected, the
monitor goes into teaching mode.
For a video tutorial, go to http://www.polar.com/en/polar_community/videos.
Teaching a New Power Output Sensor*
Select Bike > Bike1/2/3 > Power > On/Off. Teach new sensor? is displayed.
To teach a new sensor, make sure you are not near (40 m/131 ft) other Power Output sensors. Then select
Yes to confirm teaching. Start test drive is displayed. Rotate the wheel a few times to activate the
sensor. A flashing red light indicates that the sensor is activated. Completed!! is displayed once the
teaching process is over. The cycling computer is now ready to receive power data.
Select No to cancel teaching. The cycling computer will not be able to measure power data.
Once the power sensor is taught to recognize the cycling computer, it will do so even if the sensor has been turned
off. When the power sensor is turned back on, the Teach new sensor? is displayed. Select NO. The monitor will
go into On/Off mode. The power sensor last taught will be taken into use. If Yes is selected, the cycling computer
goes into teaching mode.
ENGLISH
Using a New Accessory 55
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar CS 600X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar CS 600X in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polar CS 600X

Polar CS 600X Quick start guide - English - 31 pages

Polar CS 600X Quick start guide - German - 29 pages

Polar CS 600X User Manual - German - 65 pages

Polar CS 600X Quick start guide - Dutch - 29 pages

Polar CS 600X User Manual - Dutch - 68 pages

Polar CS 600X User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info