464058
23
Zoom out
Zoom in
Previous page
1/37
Next page
1. C. weight: Set chain weight as 304 g. Accept the set value with OK.
2. C. length: Set chain length as 1473 mm. Accept the set value with OK.
3. S. length: Set span length as 420 mm. Accept the set value with OK.
4. Power TEACH?:
If your sensor is already taught, select STOP.
If your sensor has not been taught, see Using a New Accessory (page 26) for more information on
teaching.
If you use the Polar Power Output Sensorâ„¢ W.I.N.D., follow the instructions below:
1. C. weight: Set chain weight in grams. Accept the set value with OK.
2. C. length: Set chain length in millimeters. Accept the set value with OK.
3. S. length: Set span length in millimeters. Accept the set value with OK.
Examples of chain weights and lengths (Due to the variation of the measurements, Polar cannot be held
responsible for their validity):
Weight Length
Shimano Dura-Ace CN-7700
Super narrow HG
280 g 1473 mm
Shimano Dura-Ace CN-7701
Ultegra CN-HG92, 105
HG72,105 HG73
280 g 1473 mm
Shimano Sora CN-HG50 335 g 1473 mm
Campagnolo Record 2000, 10
Speed Chain
260 g 1473 mm
Campagnolo 10 Speed Chains
Chorus, Centaur
274 g 1473 mm
Campagnolo Veloce, Mirage, and
Xenon
277g 1473 mm
For precise readings, all settings must be as accurate as possible. Chain length and weight are directly
proportionate to power value. If there is 1% error, the power value will also have 1% error.
There is no need to re-enter chain length and weight if links are removed. The system uses chain density
(weight/length). Removing links from the chain does not affect density.
4. Power TEACH?:
If your sensor is already taught, select STOP.
If your sensor has not been taught, see Using a New Accessory (page 26) for more information on
teaching.
Altitude Settings
Calibrate the altimeter to ensure accurate measurement.
Manual calibration: Set the reference altitude whenever a reliable reference, such as a peak or a
topographic map, is available or you are at the sea level.
Automatic calibration: By using the automatic altitude calibration, you can adjust the starting elevation to
be always the same in the beginning of the training session. Calibrate the elevation manually and turn the
automatic calibration on. From now on, this elevation will be always used as the base elevation in the
beginning of the training session if automatic altitude calibration is in use. Also, if the automatic
calibration is turned on and you calibrate the cycling computer manually, the new value will be used as a
new starting elevation for automatic calibration.
Select automatic calibration if you always train in the same environment to ensure correct altitude values.
ENGLISH
Settings 23
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar CS 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar CS 500 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polar CS 500

Polar CS 500 User Manual - German - 43 pages

Polar CS 500 User Manual - Dutch - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info