Manual Plustek SmartOffice PS406U (page 40 of 49) (English)

585732

Zoom out

Zoom in

1/49

CALIBRATING THE SCANNER

Calibrate the scanner if colors appear in areas that should be white, or colors of the

scanned image and the original vary a lot. This allows you to adjust and compensate

for variations that can occur in the optical component over time by its nature.

The following describes how to calibrate the scanner:

1. The Calibration Sheet, marked with an arrow on either edge at both sides, is

used specially for ADF Scanning calibration.

2. Insert the special calibration sheet into the ADF of the scanner, with an arrow

toward the scanner buttons.

Attention

Please insert the special calibration sheet

included with the scanner. Alternatively you may

also use any plain white sheet of paper sized in

A4 (216 by 297 mm) instead; however, the

calibration effect may be less good than the

special calibration sheet.

3. Click Start > All Programs > Your scanner model name > Calibration

Wizard.

4. Click Next from the Calibration Wizard that pops up and then click Calibrate

Now....

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Plustek SmartOffice PS406U in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Plustek SmartOffice PS406U Manual

Product: