681001
17
Zoom out
Zoom in
Previous page
1/36
Next page
Determine the position of the Smile
to the energy meter. To this end,
please keep in mind the location
where the Smile will be positioned in
relation to the socket and the meter.
Fix the mounting frame of the Smile
to the wall near the meter. Please
be careful not to strike the existing
electrical wiring in the wall during
drilling.
Place the Smile
Connect the Smile P1 to the
meter by plugging the P1 cable
from the Smile into the P1 port
of the smart meter.
Connect the Smile P0 to the
meter by connecting the round
head of the cable on to the
optical port of the main meter.
Ensure that the P0 head is placed
in such a way that the wire hangs
straight down.
The Smile S0 reads the S0 pulse
output S0 class A (24 VDC)
from your S0 pulse meter. The
black cable will be connected
to the negative terminal (-) and
the red cable to the positive
terminal (+) by the installer.
Click the Smile onto the mounting
frame.
Connect the Smile to your meter as
illustrated below with your Smile.
The installation of the Smile S0 should
be executed by a registered installer.
Attention: S0 wires from the Smile
S0 may only be connected to a S0
output in accordance with
EN-IEC 62053-31.
1
17
0123456789
P1
P1
0123456789
P1
P0
S0
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plugwise Smile P1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plugwise Smile P1 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info