764243
20
Zoom out
Zoom in
Previous page
1/24
Next page
6R, 6G, 180R, 180G
Users Manual
16
Plumb Accuracy (6R, 6G Only)
To check the accuracy of the plumb:
1. Find a site that has a 2.29 m (7.5 ft) vertical height.
2. Place a cross mark at the bottom of the site.
3. Center the down point laser on both axes of the cross mark. See Figure 10.
Figure 10. Plumb Accuracy
4. Place a cross mark at the point where the up point laser intersects the target area at the top of the site.
5. Turn the Product 180 ° on its center.
6. Repeat step 3 and step 4.
If the first and second cross marks on the target area at the top of the site are the same, the laser is plumb.
7. If the cross marks are not the same, measure the distance between the center points of the two cross marks
and divide by two to calculate the difference of error.
If the distance is ≤3 mm at 10 m (1/8 in at 30 ft), the laser is within calibration accuracy.
≥ 2.29 m
(7.5 ft)
123
4
-
3 mm @ 10 m
1 2
1 2
(1/8 in @ 30 ft)
1 2
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PLS - Fluke 180R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PLS - Fluke 180R in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of PLS - Fluke 180R

PLS - Fluke 180R User Manual - German - 24 pages

PLS - Fluke 180R User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info