764244
19
Zoom out
Zoom in
Previous page
1/24
Next page
Laser Levels
Check Product Accuracy
15
Vertical Laser Accuracy
To check the accuracy of the vertical laser:
1. Find a door jamb that has 2.29 m (7.5 ft) clearance on both sides of the door.
2. Put a center mark on the door header an equal distance from both sides of the door jamb.
3. Put a cross mark (mark 1) on the floor centered on the mark on the door header. See Figure 9.
4. Put a second cross mark (mark 2) 2.29 m (7.5 ft) from mark 1. Use the vertical laser to make sure that
mark 2 is centered on the door header and intersects mark 1.
5. Put the Product on mark 2 with the vertical laser on.
6. Put a third cross mark (mark 3) on the floor 4.57 m (15 ft) from the Product. Use the vertical laser to make
sure that mark 3 is centered on the door header and intersects mark 1.
7. Put a cross mark on the door header above mark 1.
8. Move the Product to mark 3 and align the laser so that it intersects the centers of marks 1 and 2.
9. Put another cross mark on the door header above mark 1.
10. Measure the distance between the center points of the two cross marks.
If the distance is ≤3 mm at 10 m (1/8 in at 30 ft), the laser is within calibration accuracy.
Figure 9. Vertical Laser Accuracy
1
3
2.29 m
(7.5 ft)
4.57 m
(15 ft)
1
2
2
123
1 2 = Vd
3 mm @ 10 m
(1/8 in @ 30 ft) = OK
Vd x 2
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PLS - Fluke 180G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PLS - Fluke 180G in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of PLS - Fluke 180G

PLS - Fluke 180G User Manual - German - 24 pages

PLS - Fluke 180G User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info