Manual Plieger REV 800 - 0046800 (page 11 of 78) (All languages)

638821

Zoom out

Zoom in

1/78

Installation

Home receiver unit:

Mains operation:

Battery operation:

Remote sensor for thermo-hygrometer

Plug in the mains adapter (21) into the adapter socket at the backside (20) for

basic operation and continuous backlight. Additionally insert 3 pieces of AA batteries to assure the

current supply during a power failure.

If a continuous backlight is not necessary you only have to insert 3 pieces of

AA batteries. The backlight can be activated for about 15 seconds by pushing the button

“Snooze/Light/Sound” (10).

After the installation of the device the unit of the pressure is flashing. Select between the pressure

units mb (millibar), inHg (inches of mercury) and hPA (hektopascal) with buttons 3 and 4 and

choose with button “Pressure” (7). Now the spot height is flashing, which can be selected in the

same manner. The more exact the spot height of the location, the more exact is also the weather

forecast.

Loosen the screws on the battery door with a small screwdriver

Insert 2 pieces of AAA batteries according to the indicated polarity

Channel 1 is preselected. If more than one sensor is used you have to select channel 2 and 3

for the 2nd and 3rd sensor.

To connect to the main station press and hold the “CHANNEL/SEARCH”-button (5) on main unit

until you hear a beep sound.

Press the “TX”-button (B) for the registration of the outdoor sensor on the main station, so that

the measured values will be shown on the main station after a successful transmission.

Select degree unit Celsius (C) or Fahrenheit (F) by pushing the “C/F”-button (A).

Close the battery compartment.

Press the bell push button (15). On the receiver, the signal tone sounds. Select the loudness by

using the volume control (17).

Automatic adjustment of time and date

Pushing the button “ ” results in a synchronisation with the radio clock in Mainflingen (Germany).

In this process the antenna symbol flashes until a successful transmission and afterwards it is

shown permanently. If a transmission is not possible, the process must be repeated on another

place.

The weather station should be synchronised apart from electrical devices, because they

have a negative influence on the synchronisation.

If a synchronisation is also not possible after several attempts, the time and date can also be

adjusted manually as described in the following. During the next synchronisation the manual

adjusted values will be overwritten.

Note:

Manual adjustment of time and date

By pushing the “Clock”-button (1) for 3 seconds the display “24H” starts flashing. Now the desired

settings can be selceted with buttons 3 and 4 and confirmed by pushing “Clock” (1) again.

The different settings are all adjusted in the same manner and have the following sequence:

24H/12H (format) hour minute year date (format) month day.

The weekday and moon phase indicator will be added automaticly according to the entered date.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Plieger REV 800 - 0046800 in the language / languages: All languages as an attachment in your email.

The manual is 2,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Plieger REV 800 - 0046800 Manual

Product: