234192

Plextor dvd recorder px 504a Manual

28
Zoom out
Zoom in
Previous page
1/56
Next page
Section 2. Installing Your PX-504A
22
PX-504A Installation and Users Manual
Make Sure the Drive Is Recognized
After installation, make sure the PX-504A drive and other IDE peripherals are
recognized by your computer. To check whether they are recognized:
To see if the drive is recognized in Windows:
1. Turn the computer ON. After the computer boots up, you should see the
Windows display.
2. Open Windows Explorer or My Computer and ensure there is an icon for the
Plextor drive, the hard disk, and other CD-ROM drives, if present. The may be
D: or E: or another designator.
3. If the PX-504A drive is not recognized in Windows, reboot the computer and use
your computer’s setup program to program the BIOS to recognize it.
NOTE:
Refer to the computer’s documentation for information on how to run the
motherboard BIOS setup program.
4. Use the motherboard BIOS setup program to set up IDE Master and Slave
designations, as needed for your configuration, on the primary or secondary IDE
bus. If the IDE interface is disabled on your computer, you will need to enable it.
If a Master or Slave device is set to “disable” or “none” or a similar designation,
change it as appropriate to “enable” or “auto” (or something similar, depending
on your setup program).
5. Save and exit your CMOS setup to restart your computer with the new settings.
6. In Windows 98, 98SE, or Me, once the system comes up click the Start button,
then Settings, then Control Panel, then double-click on System icon, then click on
Device Manager tab. Click the + sign next to the CD-ROM heading and look at
the “Plextor DVDR PX-504A” entry underneath.
-or-
In Windows 2000 or XP, right-click on the My Computer icon and select
Properties. Click on the Hardware tab, then click on the Device Manager button.
Click the + sign next to the CD-ROM heading and look at the “Plextor DVDR
PX-504A” entry underneath.
If you do not see this drive listed as one of the devices, or if it has a yellow diamond
with an exclamation point (!), contact Plextor Technical Support. (See “Appendix B:
Technical Support” for the different ways you can contact us.)
Downloaded from www.Manualslib.com manuals search engine
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plextor dvd recorder px 504a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plextor dvd recorder px 504a in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info