234192
19
Zoom out
Zoom in
Previous page
1/56
Next page
Section 2. Installing Your PX-504A
PX-504A Installation and Users Manual
13
Before PX-504A Installation How to Install the PX-504A
A
Hard disks connected as Master and
Slave devices on primary IDE port;
CD-ROM connected as Master
device on secondary IDE port.
Remove the CD-ROM drive, change
it to Slave, and re-connect it to the
secondary IDE port.
Set the mode jumper to Master, and
connect the PX-504A as Master
device to the secondary IDE port.
NOTE:
This configuration can make it very difficult to write from the CD-ROM to
the PX-504A at maximum rated speed using “on-the-fly” copying. System
configuration and performance will make a big difference.
Depending on how fast the CD-ROM drive can stream data to the PX-504A, it
may not be fast enough to keep the buffer full. In this case, the buffer may
become empty and a buffer underrun error may happen. However, because it is
equipped with Buffer Underrun Proof technology, your PX-504A can still make
successful copies if you use software that supports this feature. (All software
shipped with the Plextor PX-504A drive retail kits supports Buffer Underrun
Proof technology.)
If you still have problems writing with this configuration, use the image writing
method (that is, write an image to your hard drive, then write that image onto the
CD-R or CD-RW media), or record at a lower speed for best results. We also
recommend that DMA be enabled on your computer, if your system supports it.
Figure 6. How to Install the PX-504A If Your Computer Is Originally Set Up in
Configuration A
Downloaded from www.Manualslib.com manuals search engine
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plextor dvd recorder px 504a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plextor dvd recorder px 504a in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info