636453
12
Zoom out
Zoom in
Previous page
1/36
Next page
__________________________________________12_________________________________________
Also for Dealer4 Machines with serial numbers from 4053 upwards, a similar photointerruptor is used as
a Board Switch. This photointerruptor is located on the bottom of the machine at the back of the Board
Pocket:
If any of the photointerruptors are too dirty the light beam can be blocked and Dealer4 will not operate
correctly.
Operation of the photointerruptor can be checked on the “Maintenance” section of the Dealer4
software:
After entering the “Maintenance” window look at the five text boxes under Labels Photo5-1. With no
card inside the machine all these boxes should be green. Check “Motor On”, put a deck of cards in the
feeder and click “Feed Card”. The card will go through the machine. The Photo boxes become red for the
moment when the card passes through them and should then be green again. If any of the boxes stay
red after this operation that particular photointerruptor is dirty and requires cleaning.
The Board Switch photointerruptor operation can be checked by observing the Board Switch text box
when inserting and removing the board. When the board is inside the machine this text box should be
green with ON text, when out of the machine – text box should be red with OFF text.
Top elemen
t of the Board
Switch Photointerruptor
Bottom element of the Board
Switch Photointerruptor
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PlayBridgeDealer Dealer4 Maintenance at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PlayBridgeDealer Dealer4 Maintenance in the language / languages: English as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info