636453
4
Zoom out
Zoom in
Previous page
1/36
Next page
__________________________________________4_________________________________________
Typically the first pair of rollers is worn the quickest because every card goes through this pair. The
machine can still be used in this condition but the dealing process will become slow to the point where
dealing will become impossible. It is therefore recommended that when roller wear is discovered – the
machine should be sent in for a service.
The feeder roller will also wear and should be replaced along with the drive rollers every 40000 deals. A
typical symptom of this wear is a repeatable “Feed Card Error” (Error 55 or 56). Please note that this
error may also be due to a dirty roller (see Section 2.2) or incorrect Feeder Gap (see Section 3.1) as the
symptoms can be the same.
Fourth pair
of drive
rollers
Third pair
of drive
rollers
Second pair
of drive
rollers
First pair
of drive
s
Feeder roller
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PlayBridgeDealer Dealer4 Maintenance at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PlayBridgeDealer Dealer4 Maintenance in the language / languages: English as an attachment in your email.

The manual is 6,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info