290620
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
3 Recording Video Clips
• Recording Video Clips
sec
1. Switch the camera on, set the function switch to Image Capture Mode.
2. Press the Mode Button M until the video clip icon
is blinking. Press the Select
Button to select the video clip capture mode.
3. Frame the subject through either the optical viewfinder or the video viewfinder by
pressing the Monitor ON/OFF Button to enable video viewfinder operation.
4. Press the shutter button once to start video clip capture.
5. The status LCD will start counting the length of the video clip in seconds.
6. Note that when the video clip capture is started with the video viewfinder on, the video viewfinder frame
rate will slow down. This does not affect the frame rate of the captured video clip.
7. Press the shutter button a second time to stop the video clip capture.
REMARK:
The captured video clip cannot playback on a the Monitor LCD.
• Deleting Video Clip from the camera
1. Switch the camera on.
2. Set the function switch to Image Review Mode.
3. When you have displayed a video clip on the monitor LCD that you would like to delete, press the Delete
button adjacent to the monitor LCD to delete the video clip.
• Deleting All Video Clips from the Camera
1. Switch the camera on, set the function switch to Image Capture Mode.
2. Press the Mode Button M until the Trashcan icon
is blinking on the status LCD. Press the Select Button
to enable the Delete All Mode. Press the shutter button to Delete All video clips from the camera. The
camera will beep 3 times to confirm that the video clips were deleted. If the shutter button is not pressed
within 5 seconds of selecting the Delete All mode, the camera will revert to the last state that it was in
prior to entering the Delete All mode.
4 Installing your Software onto a Computer
• Window® 98SE users
Window® 98SE users will require to download DirectX 6.1 or higher software from the internet. Go to http:
//www.microsoft.com/directx and find the free download DirectX 6.1.
• Install the software
IMPORTANT! - Make sure you install all the software from the CD supplied before you connect your camera to a
computer and transfer pictures from your camera to the computer.
IMPORTANT! If the computer request you to install the Windows operating system during the software installation,
place the windows CD into the computer CD ROM drive. The computer will install the necessary les from the CD
automatically. When the Windows software appears to have nished the operation close the Windows screen. Remove
the Windows CD and store safely.
Note:
Microsoft® Netmeeting™ already bundled into Windows® 2000 and XP OS. Users using Window® 2000 or XP do not
need to install this software from the CD-ROM.
Open & Close
1. Before you begin, close all other software applications open on your
computer.
2. Insert the CD supplied into the computer CD-ROM Drive.
3. The CD User Interface Screen will automatically launch.
4. With the mouse, click on each software interface button in turn following the
on screen prompts.
NOTE! When prompted to do so, register your name and the other
details requested for further on line support. You must be connected
to your internet service provider to register on line electronically.
MicroMegaSPOX UM GerEn.indd 05/07/2002, 05:05 PM7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plawa spypen spox 1 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plawa spypen spox 1 3 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Plawa spypen spox 1 3

Plawa spypen spox 1 3 User Manual - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info