491736
13
Zoom out
Zoom in
Previous page
1/16
Next page
13
8 Troubleshooting Problems
• Troubleshooting
The troubleshooting guide is designed to help you. If problems continue, please contact your local customer
support hot-line. See your registration card for help line contact details.
For Windows® Users:
PC
The LCD display will ash. Battery power is too low to
continue taking images.
Upload saved images or recharge the battery
immediately.
I receive an error message
when I am installing the Spypen
qx
.
o digital camera driver.
Spypen qx
.
o camera folder is
not found in the programs menu
after I have installed the driver.
No LCD display after power on
the camera.
I cannot upload images to
the PC.
Spypen qx
.
o digital camera
driver does not load.
The installer for the Spypen
qx
.
o camera requires the qx
.
o
be connected to the PC (via
the USB) after the software
has been installed.
Insufcient/empty battery
power.
Connection failure.
Shut down all other applications and attempt to
re-install the driver, or download the updated
driver from www.spypen.com and install the
updated driver.
Check the USB controller in your BIOS if
they are activated. If these does not work
contact your national Customer Support
representative.
Install the software, restart your PC, and nally,
connect the qx
.
o to the PC via the USB, then
the software folder will appear in the Program
menu.
Recharge the battery by using the docking
station.
Check all cables connections are secured.
Symptom SolutionProblem
I cannot run the Spypen qx
.
o
camera.
Conict with another camera
driver capture device.
If you have any other camera installed on your
computer, remove the camera and it’s driver
completely from your system to avoid conict
with another camera or capture device.
Black corner appears on the
images taken.
Lost corner of images. Make sure no object cover the lens.
My CD Installation wizard does
not work.
The auto installation le is
switched to off.
or
The CD ROM is disconnected.
Go to the computer desktop. Right click on “My
Computer”. Click “Properties”. Select “Device
Manager”. Double click on “CD-Rom”, double
click on “CD-R” (normally the manufacturer’s
name). Click on “Settings”. Ensure “Auto insert
notication” is ticked and the “disconnect” is
ticked. If you change the settings the computer
will ask you to restart your PC. Click “Yes”.
For Macintosh® Users:
MAC
I receive an error message
when I am installing the Spypen
qx
.
o digital camera driver.
“Spypen qx
.
o Digital Camera”
plug-in le and Spypen qx
.
o
digital camera” folder is not
found in the Programs menu
after I have installed the driver.
I can not power on my qx.O
Spypen qx
.
o digital camera
driver does not load.
The installer for the Spypen
qx
.
o digital camera requires
the qx
.
o be connected to the
Mac (via the USB) after the
software has been installed.
Insufcient battery power.
Shut down all other applications and attempt to
re-install the driver, or download the updated
driver from www.spypen.com and install the
updated driver.
Install the software, restart your Mac, and
nally, connect the qx
.
o to the Mac via the USB,
then the plug-in le and folder will appear in
the Hard disk.
Connect the camera to a Mac which is turned
on via the USB cable, and the camera will then
draw power from the Mac.
Symptom SolutionProblem
I cannot upload images to the
Mac.
Connection failure. Check all cables connections are secured.
The LCD display will ash. Battery power is too low to
continue taking images.
Upload saved images or recharge the battery
immediately.
I cannot run the Spypen qx
.
o
Digital Camera.
Conict with another camera
driver capture device.
If you have any other camera installed on your
computer, remove the camera and it’s driver
completely from your system to avoid conict
with another camera or capture device.
Please also refer to the help les & User Guides that accompany the enclosed applications.For further
information and support, please visit our website: http://
www.spypen.com
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plawa Spypen qx.o 1.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plawa Spypen qx.o 1.3 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Plawa Spypen qx.o 1.3

Plawa Spypen qx.o 1.3 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info