103742
9
Zoom out
Zoom in
Previous page
1/18
Next page
9
• Setting the ash mode
1. Switch the camera ON.
2. Set the picture resolution using the mode button.
3. Press the Flash button
, the camera LCD will display a flashing
until the flash
mode is ready.
4. The Green LED light on the flash will light when sufficient battery power has
charged the flashlight between pictures.
5. Use the camera shutter button to take a picture.
Back View
Flash Button
LCD Display
• Using the test button
Press the flashlight test button located next to the Green LED to check correct operation of the flashlight.
LED
Test Button
AUTO
5 Installing your Software onto a Computer
• Window® 98SE users
Window® 98SE users will require to download DirectX 6.1 or higher software from the internet. Go to
http://www.microsoft.com/directx and find the free download DirectX 6.1.
• Install the software
IMPORTANT! - Make sure you install all the software from the CD supplied before you connect your camera to a computer and transfer pictures
from your camera to the computer.
IMPORTANT! If the computer request you to install the Windows operating system during the software installation, place the windows CD into
the computer CD Rom drive. The computer will install the necessary les from the CD automatically. When the Windows software appears to have
nished the operation close the Windows screen. Remove the Windows CD and store safely.
1. Before you begin, close all other software applications open on your
computer.
2. Insert the CD supplied into the computer CD Rom Drive.
Open & Close
3. The CD User Interface Screen will automatically launch.
4. With the mouse, click on each software interface button in turn following the
on screen prompts.
NOTE! When prompted to do so, register your name and the other details requested for further on line support. You must be connected to your
internet service provider to register on line electronically.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plawa Spypen MEMO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plawa Spypen MEMO in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info