491730
18
Zoom out
Zoom in
Previous page
1/21
Next page
18
5. Troubleshooting
The troubleshooting guide is designed to help you. If problems continue, please contact your
local customer support hot-line. See your registration card for helpline contact details.
My cordless mouse or
pen will not work.
The battery in your cordless
mouse or pen is dead.
Your SPYPEN Designer is not
properly connected via the USB
cable or the cable is not properly
connected to.
There could be a problem with
the USB controller software,
human interface device, ports
or the USB connected to your
SPYPEN Designer.
Replace batteries.
Check the USB cable connection to your PC.
Check the status of your system by checking in
your PC Device Manager:
1. Single mouse click on “My Computer” on your
desktop.
2. Right mouse click.
3. Select “Properties” then “Device Manager”.
4. Select “+” on “Human Interface Devices”, “HID-
compliant device” should be displayed. If this is
not displayed, your PC has not recognised the
SPYPEN Designer Cordless Pen. This veries
that the SPYPEN Designer has been properly
connected to your PC, the problem most likely
stems from the cable or ports or USB controller
that connects the SPYPEN Designer to your PC.
5. Select “+” on “Human Interface Devices”, “HID-
compliant device” should be displayed. If this is
not displayed, your PC has not recognised the
SPYPEN Designer Cordless Mouse. This veries
that the SPYPEN Designer has been properly
connected to your PC, the problem most likely
stems from the cable or ports or USB controller
that connects the SPYPEN Designer to your PC.
Select “+” Universal Serial Bus Controller (USB)
If “!” or “?” appear there maybe a problem
with the USB controller. Or if Universal Serial
Bus Controller cannot be found consult your PC
stockists helpline.
6. Select “+ Ports”. If “!” or “?” appear there maybe
a problem with the port connection between the
cable and your PC. Consult your PC stocklists
helpline.
7. Check to see if there is any “Unknown device”
listed.
Your PC may be confused where to locate the les
produced during the driver installation. Highlight
the “Unknown device” and select “remove”.
Uninstall the SPYPEN Designer Driver (see
Section 3.2.2). Insert batteries and re-install
SPYPEN Designer Driver, follow the on-screen
instructions.
Problem
Symptom
Solution
You may have installed the
software before installing the
batteries in the SPYPEN
Designer Cordless Pen and
Mouse.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plawa SPYPEN Designer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plawa SPYPEN Designer in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Plawa SPYPEN Designer

Plawa SPYPEN Designer User Manual - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info