290619
9
Zoom out
Zoom in
Previous page
1/25
Next page
9
• Taking Macro Picture
Usually we set the Normal / Macro Selector to Normal when the subject is 20 inches to infinity. For
subjects within 8 ~ 20 inches, set the selector to Macro .
NOTE:
The ash is set to “Flash Off” when the Macro is activated except ash setting is set to “Flash on”.
Users can change the ash setting to “Flash on” by pressing Flash button. But the Flash Auto and Red-Eye Reduction
setting is not available if Macro mode is selected. They are only available in Normal mode.
• Taking Continuous Pictures
The camera will record pictures continuously at the speed of approximate 3 pictures per shot.
1. Turn the camera on.
2. Set the Mode selector to Auto or Manual.
3. Press the Continuous Mode button to activate Continuous mode.
4. Be sure that icon
appears on the LCD screen, then press Shutter button.
Press the Continuous Mode button again to cancel Continuous mode function.
NOTE:
The number of continuous pictures you can take will depend on the available memory and resolution settings.
In continuous mode, can take 3 pictures per shot
• Setting the Flash Mode
1. Turn the camera on.
2. Set the Mode selector to Auto or Manual.
3. Press button to cycle through the Flash Mode until the one you want is shown on the LCD screen.
The camera has four flash modes. Different flash setting applied to different situation:
Flash Mode on, the flash fires for every picture. Use this setting in high-contrast situations to provide
fill-light or use it indoors in low light.
Flash Mode off, the flash does not fire. Use this setting for outdoor pictures or where flash is prohibited
or may be distracting. Also use when shooting toward a reflective surface, such as a window or mirror.
If you do not have enough light when using this setting, your pictures will be too dark.
A
Auto Flash Mode, the flash fires automatically as needed. Use this setting to take most pictures.
Red eye, Use this setting to avoid red glare in your subject’s eyes. The camera fires a brief, preflash
flash before the regular flash.
NOTE:
Red Eye
and Auto Flash
A
mode are not available if Macro mode is selected. They are only available in Normal
mode.
Never touch or block the ash with your ngers. Doing so can soil these components and interfere with correct ash
operation.
• Setting Quick View
This setting enables you to view the picture immediately on the LCD screen right after it is taken. You can
perform Quick View Setting in any camera mode.
1. Turn the camera on.
2. Press Menu button and use Right button to select “SETUP MENU .
Press to select item.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plawa spypen atol 2 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plawa spypen atol 2 1 in the language / languages: English as an attachment in your email.

The manual is 5,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Plawa spypen atol 2 1

Plawa spypen atol 2 1 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info