290619
5
Zoom out
Zoom in
Previous page
1/25
Next page
5
• Installing the Batteries
2 x AA Alkaline batteries are supplied with the product. For more guidelines on battery usage, please see
Using your batteries.
1. Open the camera battery door by pushing it outwards as illustrated.
2. Insert the batteries as shown, ensuring you follow the +/- signs correctly.
3. Close the battery door by pushing it down and then slide it towards the camera to lock.
NOTE:
You can use either 2 X AA batteries or an AC adaptor (DC3.3V, not included) to supply power for the camera.
• Turning the Camera On and Off
Fully press and hold the Power button until the operation LED turns green and the
LCD is on. Press and hold the Power button again to turn off the camera.
Power button
Operation LED
NOTE:
It takes about 2 seconds to power up the camera.
When powering on the camera in Auto/Manual/Video mode, the date will display on the
bottom right corner of the LCD screen for one second. Then it changes to time for one
second, after that the date and time indicator will be off.
• Power Save Setting
Your camera is designed to turn off LCD screen and the camera automatically after a period of inactivity
to save battery life. You can change Power Save Setting by the following steps.
1. Turn the camera on.
2. Press Menu button.
3. Press the Right button to select “SETUP MENU .
Press to select
“POWER SAVE”.
Press to select item.
The function for each setting is:
One minute: This camera will automatically turn off the LCD screen after one minute of inactivity (the
operation LED will flash.) Press any button will reactivate the LCD screen. After the above 1 minute power
saving, if there is no more operation in another one minute, the camera will automatically power off. You
need to press the Power button if you want to turn on the camera again.
Three minutes: This camera will automatically turn off the LCD screen after three minutes of inactivity (the
operation LED will flash.) Press any button will reactivate the LCD screen. After the above three minutes
power saving, if there is no more operation in another one minute, the camera will automatically power off.
You need to press the Power button if you want to turn on the camera again.
Off: This camera will not perform the power saving function.
NOTE:
• Power save setting is available in all camera modes.
• Auto power off is automatically disabled while the AC adaptor is connected to the camera.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plawa spypen atol 2 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plawa spypen atol 2 1 in the language / languages: English as an attachment in your email.

The manual is 5,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Plawa spypen atol 2 1

Plawa spypen atol 2 1 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info