103732
9
Zoom out
Zoom in
Previous page
1/19
Next page
9
7.9.3 Using SmartMedia™ Card with ACTOR
Your ACTOR uses SmartMedia™ Card as the main storage of your images. For more images storage, you can extend by
using higher memory SmartMedia™ Card(not included). Your ACTOR can use SmartMedia™ Card of 8, 16, 32, 64 and 128MB
memory sizes.
Important Note:
• You can use any SmartMedia™ Card that has been formatted by other device, but it will wipe out any insisting les on it when loaded. You
also cannot use it in the other device.
Your image taken by ACTOR and store in SmartMedia™ Card may not read from general SmartMedia™ Card Reader and other brand camera.
• If
appears in your LCD, it means there is no SmartMedia™ Card in your ACTOR.
• When the SmartMedia™ Card is full, the icon(s) in the LCD display will ash.
8. Getting Started
8.1 Switching the ACTOR On from the Stand-by Mode
Press and release the Mode Button once when the ACTOR is in Stand-by Mode (LCD is blank) will reactivate your ACTOR
the LCD lights up after several seconds.
8.2 Taking an Image
Press the Shutter Button to take an image. The ACTOR will beep. A high pitched beep indicates
that the image was taken successfully and the counter will count up. The LCD screen displays the
number of images taken. Press the Shutter Button to take an image. 3 modes (high, normal and
low resolution) where you could select to take your image.
By pressing the Mode Button you can cycle through additional features as displayed on the LCD.
When a given mode is displayed it can be accessed by pressing the Shutter Button.
8.3 Video Clip with Audio Mode
sec
During recording Recording nished
To create a movie clip:
1. Press the Mode Button until both
appears on the LCD.
There are two modes: Normal mode for CIF recording and
Low mode for QCIF recording.
2. Press and hold the Shutter Button to start taking the movie. Release
the Shutter Button to stop recording the movie.
3. During Movie Recording, the 3 digits 7 segments will display number
of seconds taken.
4. When recording is nished, the 3 digits 7 segments will display
number of clips remaining.
Important Note:
Storage of both normal and low resolution video clips in the same SMC is not recommended as this may lead to distortion of the low resolution
video clips.
8.4 Self-Timer Mode
To use the self-timer feature, press the Mode Button until
appears in the LCD then press the
Shutter Button to start a 10 second self-timer. The LED will blink and ACTOR will issue a short beep
every second and then a long beep just prior to a further short beep which indicates that the image
has been successfully taken. The resolution is set at
only when Self-Timer mode is used.
8.5 Audio Recording Mode
sec
During recording Recording nished
To create an audio clip:
1. Press the Mode Button until the
appears on the LCD.
2. Press and release the Shutter Button to start recording. Press and
release the Shutter Button again to stop recording.
3. During Audio Recording, the 3 digits 7 segments will display number
of seconds taken.
4. When recording is nished, the 3 digits 7 segments will display
number of clips taken.
8.6 Deleting the Last Image/Last Movie Clip with Audio/Last Audio Clip
When you wish to delete the last image/last movie clip with audio/last audio clip in your ACTOR. Press DELETE button to
delete last image/movie clip/audio clip.
8.7 Changing the Image Resolution
Image resolution can be changed whenever you need. Cycle through the Mode options by pressing the Mode Button until
High/Normal/Low appears at the rear LCD.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plawa Spypen Actor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plawa Spypen Actor in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Plawa Spypen Actor

Plawa Spypen Actor User Manual - German - 25 pages

Plawa Spypen Actor User Manual - French - 29 pages

Plawa Spypen Actor User Manual - Spanish - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info