706065
7
Zoom out
Zoom in
Previous page
1/15
Next page
2. To lift the telephone handset from its cradle at your command even when you are away from
your desk.
The installation of the Handset Lifter (17) is described in the user guide that is supplied with it.
MAKING A CALL USING THE LIFTER
Press the Talk Button (20) on the headset. The lifter will raise the telephone handset off the hook.
You will then hear a dial tone in your headset and can proceed to make a call as normal.
When you have finished your call press the Talk Button (20) on your headset. The handset lifter
then lowers the handset to end the call.
RECEIVING A CALL USING THE LIFTER
When a new call is received the telephone rings as normal, but in addition, a ring alert comprising
a repeating sequence of three short beeps will be heard in your headset.
Note: This additional call alert is only active when the Lifter (17) is connected.
To answer the call press the Talk Button (20) on the headset. The lifter will then raise the
telephone handset off the hook and you will then be able to talk to the caller.
When you have finished your call press the Talk Button (20) on your headset. The handset lifter
then lowers the handset to end the call.
IntelliStand
TM
FUNCTION
When the CS60 DECT Wireless Headset System is used in conjunction with a Plantronics Handset
Lifter (17), you can enable the IntelliStand feature.
The IntelliStand senses when the headset has been removed or replaced in the CS60 Base Unit,
automatically activating the lifter to answer or end a call.
The IntelliStand feature is disabled when the IntelliStand switch (5) is in position I or enabled when
the switch is in position II.
SWITCHING FROM HEADSET TO HANDSET WHEN USING THE LIFTER
If during a call you are using your headset and want to switch to the telephone handset, remove
the handset from the Lifter, then press the Talk Button (20) on your headset. The Lifter will lower
and you will then be able to continue the call using the handset.
SWITCHING FROM HANDSET TO HEADSET WHEN USING THE LIFTER
If during a call you are using the telephone handset and want to switch to your headset, press the
Talk Button (20) on the headset. The Lifter will raise and you will be able to continue the call using
your headset.
Replace the telephone handset on the Lifter. When the call is finished press the Talk Button (20)
on your headset. The Lifter will lower the handset and end the call.
UK
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Plantronics CS60 DECT - Wireless Headset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Plantronics CS60 DECT - Wireless Headset in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Plantronics CS60 DECT - Wireless Headset

Plantronics CS60 DECT - Wireless Headset User Manual - German - 15 pages

Plantronics CS60 DECT - Wireless Headset User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info