717289

PKM KG288.4A N Inox Design Manual

49
Zoom out
Zoom in
Previous page
1/76
Next page
49
2. Completely remove the transport-protection (adhesive tape) of the accessories.
Be very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
3. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
4. If the appliance is positioned beside another fridge or freezer, leave at least a
free space of 2.0 cm between the appliances in order to avoid condensation.
5. Check that the appliance and the power cord are not damaged.
6. Install the appliance in a dry and well-ventilated place.
7. Protect the appliance from direct sunlight.
8. The doors must open completely and without hindrance.
9. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
10. Connect the appliance to the mains properly.
11. The nameplate is situated inside the appliance or at the back.
3.2 Ventilation
Observe the required minimum distances for proper ventilation.
NOTICE! Fix the plastic wall spacers (depending on model) on the
condenser at the back of the appliance to ensure a ventilation gap
between the appliance and the wall.
MINIMUM DISTANCES REQUIRED FOR PROPER VENTILATION:
Back ↔ wall
min. 20 mm
Sides ↔ wall
min. 20 mm
Free space above
min. 100 mm
The following minimum distances are recommended by the manufacturer to ensure
optimum efficiency of the appliance:
Back ↔ wall
min. 25 mm
Right / left ↔ any piece of furniture / wall
min. 25 mm
Free space above
min. 100 mm
These minimum distances may be less, but to do so can increase the power
consumption of the appliance.
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PKM KG288.4A N Inox Design at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PKM KG288.4A N Inox Design in the language / languages: English, German as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info