717415
49
Zoom out
Zoom in
Previous page
1/53
Next page
49
layers made of different kinds of
metal.
and does not indicate a malfunction.
The appliance makes humming noise when used on a high heat setting.
Caused by induction-cooking.
Normal operating condition, but the
noise should decrease or disappear
after decreasing the heat setting.
Noise caused by the fan inside the appliance.
The cooling-fan the appliance is
equipped with protects the
electronics from being overheated. It
may continue to run even after you
have switched the appliance off.
Normal operating condition. Do not
disconnect the appliance from the
mains while the fan is running.
Cookware does not become hot and the relevant symbol is displayed.
Cookware cannot be detected,
because it is unsuitable, too small or
improperly positioned on the
cooking zone.
Use suitable cookware which meets
the diameter of the cooking zone.
Place cookware on the centre of the
cooking zone.
The appliance or a cooking zone has been switched off automatically and
unexpectedly, an acoustic signal sounds and an error code is displayed
(typically alternating with one or two digits on the timer-display).
Technical malfunction.
Note the complete error-code,
disconnect the appliance from the
mains and contact the aftersales
service.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact a service department.
6.1 Error codes
Code
Possible causes
Measures
F3/F4
Temperature sensor of the
induction coil is defective.
Contact the aftersales service.
F9/FA
Temperature sensor of the
IGBT*.
Contact the aftersales service.
E1/E2
Abnormal supply voltage.
Please inspect whether the
voltage is normal.
Power on after the power
supply is normal.
E3
High temperature of the
induction coil sensor.
Contact the aftersales service.
E5
High temperature of the
IGBT sensor.
Please restart after the
appliance has cooled down.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PKM IF2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PKM IF2 in the language / languages: English, German as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info