717533
54
Zoom out
Zoom in
Previous page
1/79
Next page
54
2.4 Water connection
Only use new connection-kits for installation. The tap must be equipped with a
separate disconnector. Do not use used connection-kits.
A water pressure from 0,04 MPa to 1 MPa is required. Please contact the
aftersales service
4
or a qualified professional if the water pressure differs.
1. Pull the supply hose completely out from the storage
compartment located at the back of the appliance.
2. Connect the water supply hose to a tap with a 3/4"-thread.
3. Turn the water fully on before starting the appliance.
Removing of the water supply hose:
1. Stop the water supply completely.
2. Unscrew the water supply hose.
The water supply hose is a double-walled hose. This system interrupts the
water supply when the inner hose leaks. The interruption of the water supply is
carried out by an electronic contact.
2.4.1 Cold water connection
WARNING! Stop the water supply after operation to avoid remaining
water pressure in the water supply hose.
Connect the inlet hose to a connector with a 3/4 inch thread firmly and securely.
When the hoses are new or were not used for an extended period of time, let the
water flow until the hose is clear of any contamination. Otherwise the water inlet
may be blocked and the appliance will be damaged.
4
Not included in guarantee.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PKM GSP12A 7TI2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PKM GSP12A 7TI2 in the language / languages: English, German as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info