717383
24
Zoom out
Zoom in
Previous page
1/34
Next page
24
2. Completely remove the transport-protection. Be very careful and do not use any
aggressive or abrasive detergents to remove residuals of the transport-
protection.
3. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
4. Check that the appliance and the power cord are not damaged.
5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
8. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9. Connect the appliance to the mains properly.
10. The nameplate is inside the appliance or at the back.
Levelling
1. Use the adjustable feet at the front to level the appliance properly.
2. When the appliance is not levelled, the door and the magnetic seals will not
close properly.
Change of the hinge position
WARNING! Switch off and unplug the appliance before changing the hinge
position. RISK OF ELECTRIC SHOCK!
The change of the hinge position must be carried out by at least two persons;
otherwise you may hurt yourself or damage the appliance.
1. Remove the worktop by unscrewing the 2 screws on the back of the worktop.
Remove the worktop to the front and store it at a safe place to protect it from
damage.
2. Tilt the appliance slightly backwards and secure it in this position so it cannot
tip.
3. Unscrew the top hinge and lift the door from the hinge pin carefully. Store the
door at a safe place to protect it from damage.
4. Turn the top hinge by 180
0
for later installation.
5. Unscrew the bottom hinge.
6. Remove the screw-type foot and install it on the right side.
7. Fasten the bottom hinge loosely on the opposite side.
8. Put the door on the bottom hinge pin. Ensure that the hinge pin meets the hole
properly.
9. Fix the top hinge on the opposite side. Ensure that the hinge pin meets the hole
properly.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PKM GS83.4A T2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PKM GS83.4A T2 in the language / languages: English, German as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info