717408
30
Zoom out
Zoom in
Previous page
1/40
Next page
30
2.3 Before installation
The washer is at the end of the shaft with the GL 1/2" threaded elbow between the
components. Screw the parts together without using excessive force.
If the appliance is installed above an built-in oven, the oven should stand on
wooden strips. in the case of a joining cabinet surface, remember to leave free
space of at least 45*560 mm at the back. When installing above a built-in oven
without forced ventilation, ensure that there are air inlets and outlets for ventilating
the interior of the cabinet adequately.
2.4 Gas connection
The connection to the gas supply should be carried out using either rigid or semi-
rigid pipe, i.e. steel or copper. The connection should be suitable for connecting to
RC 1/2 (1/2 BSP male thread). When the final connection has been made, it is
essential that a thorough leak test is carried out on the hob and installation. Ensure
that the main connection pipe does not exert any strain on the hob. When a flexible
tube is used, keep that it cannot contact with a moveable part of the housing unit
and does not pass through any space susceptible of becoming congested.
It is important to install the elbow correctly, with the shoulder on the end of the
thread, fitted to the hob connecting pipe. Failure to ensure the correct assembly
will cause leakage of gas.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PKM GKM4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PKM GKM4 in the language / languages: English, German as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info