68
2.6 Electrical connection of the oven
DANGER! The appliance must be connected to the mains by a
qualified professional, who is familiar with and adheres to the local
requirements and supplementary regulations of your electricity supplier.
DANGER! Do not carry out the installation yourself. RISK OF
ELECTRIC SHOCK!
❖ Remember that the connection wire should match the connection type and the
power rating of the cooker. The connection wire must be secured in a strain-
relief clamp. The ground wire must be connected to the marked clamp of the
terminal. The electric supply of the appliance must be equipped with an
emergency switch with a distance between the contacts of at least 3 mm which
disconnects the entire appliance from the mains in a case of emergency. Read the
information on the rating label and the connection diagram before connecting
the appliance to the mains.
❖ When the socket is not accessible for the user or a fixed electrical connection
of the appliance is required, an all-pole disconnecting device must be
incorporated during installation. Disconnecting devices are switches with a
contact opening distance of at least 3 mm. These include LS-switches, fuses and
protectors (EN 30335).
➢ HOW TO OPEN THE CONNECTION BOX: move a screwdriver (1) slightly
downwards (2) to open the box; s. fig. below. You may need to release two locks
on both sides of the connection box.
