26
CAUTION!
1. Accessible parts of the hood may become hot while cooking.
2. Carry out the installation of the appliance with at least two persons.
Risk of damage. RISK OF INJURY!
NOTICE!
1. The appliance must be transported and installed by at least two
persons.
2. Unpack the parts of the chimney very carefully; otherwise you will
damage the chimney
3. Remove the complete packaging materials before initial operation.
The appliance may be equipped with a transportation lock. Remove
the transportation lock completely. When removing be very careful.
Do not use any aggressive detergents to remove residues of the
transportation lock.
4. Clean and maintain the appliance regularly to enable its proper
operation and optimal performance.
5. Take the enclosed parts from the packaging and its polystyrene-
components.
6. Check that the power cord and the appliance are not damaged before
electrical connection.
7. The rating plate must not be removed or made illegible, otherwise
all terms of the warranty become invalid!
SAVE THESE INSTRUCTIONS.
The manufacturer and distributor are not responsible for any damage or
injury in the event of failure to comply with these instructions.
2. Installation
1. WARNING! Do not lead the exhaust air into a chimney which is
used for extracting exhaust air of appliances operated by gas or other
combustibles.
2. For extracting the exhaust air always observe the current legal regulations.
3. The diameter of the exhaust hose must meet the diameter of the connecting ring.
4. If your appliance is equipped with a carbon filter, remove the carbon filter before
you operate the appliance in the extraction mode. The carbon filter should be
used in the recirculating mode only.