668133
11
Zoom out
Zoom in
Previous page
1/16
Next page
1 9
1 8
Shooting control
Shooting control
2. Half-press the release button and transmitter will send
signal for focusing, the green indicator will lit on the
transmitter and receiver, and the camera is in the focusing
state until the release or full-press the button.
3. Full-press the release button, red indicators of the
transmitter and receiver will be lit, keep fully press the button,
the transmitter will send signal of shooting continuously, the
indicators will blink red and green light in turn. The camera
will start to shot, and the shooting speed will be one photo per
sec.
4. Release the release button, the transmitter stop sending signal for shooting and
the camera will stop shooting.
Make sure to set the camera function to be [ ].
When the camera function is set to be [ ], it may cause continuous shooting.
[ ], It will be shooting every sec if camera is set as BULB it may cause the problem of under
or over exposure.
When the camera function is set to be[ ], the camera will execute delay shooting.
shooting
1. In the power-on state, move the transmitter's activities
icon to shooting icon[ ] by pressing the left move button
[ ]or right move button[ ].
2.Half-press the release button and transmitter will send
signal for focusing, the green indicator will lit on the
transmitter and receiver, and the camera is in the focusing
state until the release or full-press the button.
3.Full-press the release button, transmitter will send
signal. The red indicator of transmitter starts flashing and start
timing, the indicator of receiver will keep lighting. The transmitter continuous
output shooting signal. Camera enters into exposure shooting continuously.
BULB
4. Press the release button again, the transmitter stop sending out the
shooting signal and the time also stopped on screen displays.
BULB
Make sure to set the camera function to be [ ].
When the camera function is set to be [ ], the camera only shoot once but not BULB
shooting.
When the camera function is set to be [ ],the camera will be continuous shooting.
When the camera function is set to be [ ], the camera will be delay shooting once.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pixel TW-282 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pixel TW-282 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info