575786
9
Zoom out
Zoom in
Previous page
1/14
Next page
1 5
1 4
The differences between[ ]mode and[ ]mode are as follow: [ ]function is the release
button is pressed fully and keep on, shoot every second and stop shooting until the release
button is released. While[ ] function is the camera will start shooting when the release
button is pressed fully until press it again, the shooting will stop.
Make sure to set the camera function to be [ ].
When the camera function is set to be [ ], the camera only shoot once but not[ ]
shooting.
When the camera function is set to be [ ],the camera will be continuous shooting.
When the camera function is set to be [ ], the camera will be delay shooting once.
Delay shooting
Delay shooting setting
1. In the power-on state, move the activities icon to delay
shooting icon[ ] by pressing the move button[ ]or
right move button[ ]. Press the set button entering the
left
delay setting for adjusts the shooting numbers. Then the
numbers of shooting icon [ ],number of shooting [ ]will
blink at the same time.
2. Press button[ ]settings shot number can be increased,
press button [ ], settings shot number can be reduced. It
can be set between 1 to 99 sheets .
3. Press button[ ]enter into the delay setting of delay
shooting. The delay shooting time icon[ ], delay shooting
time[ ]will blink at the same time.
4. Press the button[ ], set the delay time increased,
press button[ ], set the delay time reduced. It can be set
between 1 to 59 seconds.
5. After set up the new parameters, press the set button, save and exit settings.
When enter to the delay shooting set, timer remote control will save the previous setting.
By pressing the left button[ ]or right button[ ], convert shooting numbers and delay
time settings.
Gently press button[ ]once to set numerical increased, hold it on, set the value rapidly
increased; Press the button[ ]once to set the numerical reduced, hold on to set the
values rapidly reduced.
The delay shooting function of TC-252 can user-defined the delay time and shots.
Shooting control Shooting control
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pixel TC-252 Timer remote control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pixel TC-252 Timer remote control in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info