491940
86
Zoom out
Zoom in
Previous page
1/588
Next page
Troubleshooting86
En
Troubleshooting
9
Chapter 9
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something
wrong with this component, check the points below. Sometimes the trouble may lie in another
component. Inspect the other components and electrical appliances being used. If the trouble
cannot be rectified even after checking the points below, ask your nearest Pioneer authorized
service center or your dealer to carry out repair work.
Picture
Problem Check Remedy
No picture is displayed
or the picture is not
displayed properly.
Is the video cable properly
connected?
y
Connect the cable properly according to the connected devices (page
41).
y
Disconnect the cable (video/audio cable or HDMI cable), then reinsert
it firmly and all the way in.
Is the video cable damaged? If the cable is damaged, replace it with a new one.
Is the input setting on the
connected TV right?
Read the operating instructions for the connected components and
switch to the proper input.
Is the output video resolution
properly set?
Press
RESOLUTION
to switch the video resolution output from the
HDMI
OUT
terminal (page 18).
y
Is the player connected with
an HDMI cable other than a
High Speed HDMI
®
/™ Cable
(with a Standard HDMI
®
/™
cable)?
y
Are you using an HDMI cable
with a built-in equalizer?
1080p or Deep Color video signals may not be output properly,
depending on the HDMI cable being used or the player’s settings. If you
wish to output the video signals with 1080p or Deep Color, connect the
TV using a High Speed HDMI
®
/™ Cable without a built-in equalizer, then
reset the player using the
Setup Navigator
(page 52).
Is a DVI device connected? The picture may not be displayed properly if a DVI device is connected.
Is
Color Space
properly set? Change the
Color Space
setting (page 77).
No picture is displayed
or picture is not output
in high definition when
playing BDs.
Withsomediscs,itmaynotbepossibletooutputthevideosignalsfrom
the VIDEO output terminal. In this case, connect using an HDMI cable
(page 41).
y
Picture is disturbed
during playback.
y
Picture is dark.
y
ThisplayersupportsRovianalogcopyprotectiontechnology.With
some TVs (such as with built-in video deck), the picture will not be
displayed properly when the copy protected DVD title is played. This is
not a malfunction.
y
If the player and TV are connected via a DVD recorder/video deck,
etc., the picture will not be displayed properly due to analog copy
protection. Connect the player and TV directly.
y
Picture is stretched.
y
Picture is cropped.
y
Aspect ratio cannot be
switched.
Is the TV’s aspect ratio properly
set?
Read the operating instructions for the TV and set the TV’s aspect ratio
properly.
Is
TV Screen
properly set? Set
TV Screen
properly (page 76).
Whenvideosignalswitharesolutionof1080/50i,1080/50p,720/50p,
1080/24p, 1080/60i, 1080/60p or 720/60p are being output from the
HDMI OUT
terminal, they may be output with an aspect ratio of 16:9
even if
TV Screen
is set to
4:3 Pan&Scan
(page 76).
Picture is interrupted. The picture may be interrupted when the resolution of the recorded
video signal switches. Press
RESOLUTION
to select a setting other than
Auto
(page 77).
Blu-ray 3D disc playback
does not output 3D views.
y
Connect the player to your TV with HDMI cable (High Speed HDMI
®
/™
Cable).
y
Your TV may not support “HDMI 3D mandatory format”.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer XV-BD121W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer XV-BD121W in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 43,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer XV-BD121W

Pioneer XV-BD121W User Manual - Dutch - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info