611812
22
Zoom out
Zoom in
Previous page
1/54
Next page
7
7
22
Playback with NETWORK features (Network audio player: N-P01)
A: Wired setting
Make sure that the LAN cable connections has completed
(page 12
).
1
Press NET SERVICE
SETUP.
The Initial Setup screen is shown on the display.
2
Select Network Setting
Network Configuration.
3
Use
/
to select Wired, then press ENTER.
4
Use
/
to select DHCP On, then press ENTER.
Select Don’t Use Proxy Server.
Note
If your router does not have a built-in DHCP server function,
you have to set up the network manually.
Select DHCP to be Off and press ENTER in step 4.
<Manual setting>
Then use /// or numeric buttons to adjust the
numbers, then press ENTER.
/: Moves the adjusting digit.
/: Increases or decreases values.
IP Address
The IP address to be entered must be defined within the
following ranges. If the IP address defined is beyond the
following ranges, you cannot play back audio files stored
on components on the network or listen to Internet radio
stations.
Class A: 10.0.0.1 to 10.255.255.254 / Class B: 172.16.0.1 to
172.31.255.254 / Class C: 192.168.0.1 to 192.168.255.254
Subnet Mask
If an xDSL modem or a terminal adapter is directly
connected to this player, enter the subnet mask listed in
your ISP documentation. In most of the cases, enter
255.255.255.0.
Default Gateway
If a gateway (router) is connected to this player, enter the
corresponding IP address.
Primary DNS Server/Secondary DNS Server
If there is only one DNS server address listed in your ISP
documentation, enter Primary DNS Server. In case there
are more than two DNS server addresses, enter
Secondary DNS Server in the other DNS server address
field.
When you connect this player to the Internet via a proxy
server, proxy server settings are required.
Select Use Proxy Server and press ENTER in step 4.
<Proxy Server setting>
Then Enter Proxy Host Name and the port number of
your proxy server in the Proxy Port field.
B: Connection settings using an iOS device
(with iOS 5.0 or later)
You can apply iPod/iPhone/iPad (iOS device with iOS ver 5.0
or later)’s Wi-Fi settings to this player.
Note
The iOS device and router must be connected at 2.4 GHz.
1
Be sure the LAN cable is not connected to the player.
2
Unlock your iPod/iPhone/iPad. Check that the Wi-Fi
mark is displayed on the iOS device.
3
Plug the power cord into an AC outlet. Press STANDBY/
ON.
4
Press iPod/USB on the remote control.
Connect the iOS device to the USB terminal.
5
Press SETUP.
6
Select Network Setting
Network Configuration
Wireless
iOS Device and then press ENTER.
7
Tap Allow on iPod/iPhone/iPad.
The Wi-Fi settings of your iPod/iPhone/iPad are applied to
the player.
Wireless
Wired
Network Configuration
DHCP Off
DHCP On
Network Configuration
IP Address
XXX
.
XXX XXX XXX
..
Share Wi-Fi Settings?
Ignore
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer XN-P02DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer XN-P02DAB in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer XN-P02DAB

Pioneer XN-P02DAB Quick start guide - English, German - 36 pages

Pioneer XN-P02DAB User Manual - German - 54 pages

Pioneer XN-P02DAB Quick start guide - Dutch - 36 pages

Pioneer XN-P02DAB User Manual - Dutch - 54 pages

Pioneer XN-P02DAB Quick start guide - French - 36 pages

Pioneer XN-P02DAB User Manual - French - 54 pages

Pioneer XN-P02DAB Quick start guide - Italian, Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info