611811
42
Zoom out
Zoom in
Previous page
1/54
Next page
42
10
10
Connecting your equipment (Stereo receiver: SX-P01, SX-P01DAB)
Connecting your equipments (XN-P02, XN-P02DAB only)
Before making or changing the connections, turn off the power and disconnect the power cord from the AC outlet.
Antenna connection
Supplied FM wire antenna (SX-P01), DAB/FM wire
antenna (SX-P01DAB):
Connect the supplied FM wire antenna or DAB/FM wire
antenna to the FM socket or DAB/FM socket, and position the
wire antenna in the direction where the strongest signal can
be received.
External FM wire antenna:
Use an external FM wire antenna (75 ohms coaxial cable) for
better reception. When an external FM wire antenna is used,
disconnect the supplied FM wire antenna.
Note
Placing the wire antenna on the unit or near the AC power
lead may cause noise pickup. Place the wire antenna away
from the unit for better reception.
Speaker connection
Use speakers with an impedance of 4 ohms as lower
impedance speakers can damage the unit.
1
Loosen the knobs of the speaker output terminals.
2
Insert the speaker cable wires into each of the terminal
post holes (positive (+) cable to the red knob, and
negative (–) cable to the black knob), then tighten the
knobs.
3
Connect the other ends of the cables to the terminals of
speakers (make sure the positive and negative (+/–)
terminals on the speakers match those on the stereo
receiver).
CAUTION
These speaker terminals carry HAZARDOUS LIVE voltage.
To prevent the risk of electric shock when connecting or
disconnecting the speaker cables, disconnect the power
cord before touching any uninsulated parts.
Do not mistake the right and the left channels. The right
speaker is the one on the right side when you face the unit.
Do not let the bare speaker wires touch each other.
Make sure that all the bare speaker wire is twisted together
and inserted fully into the speaker terminal. If any of the
bare speaker wire touches the back panel, it may cause the
power to cut off as a safety measure.
ANTENNA
AC IN
Right speaker
FM wire antenna
SX-P01
Wall socket (AC 220 V to
230 V, 50 Hz)
Monaural mini-plug
cord (without resistor)
SX-P01DAB: Connect
the DAB/FM wire
antenna to the DAB/
FM socket.
To CONTROL OUT
socket of other
Pioneer component
Left speaker
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer XN-P02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer XN-P02 in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer XN-P02

Pioneer XN-P02 Quick start guide - English, German - 36 pages

Pioneer XN-P02 User Manual - German - 54 pages

Pioneer XN-P02 Quick start guide - Dutch - 36 pages

Pioneer XN-P02 User Manual - Dutch - 54 pages

Pioneer XN-P02 Quick start guide - French - 36 pages

Pioneer XN-P02 User Manual - French - 54 pages

Pioneer XN-P02 Quick start guide - Italian, Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info