611811
36
Zoom out
Zoom in
Previous page
1/54
Next page
36
Additional information (Network audio player: N-P01)
13
8
8
6
Browse the latest firmware on your computer (a) and
then press Upload (b).
The confirmation screen is displayed. If you continue the
firmware update, press Yes. Once the firmware update
process starts, you can’t stop it. Wait until the file is
uploaded (about one minute may be required depending
on your LAN connection environment).
7
The firmware upload status screen is displayed. Press
Ok.
“The upload process finished successfully.” will be shown
when the update is completed.
Unplug the the power cord from the AC outlet after the
update is completed.
Note
This setting for the network has been confirmed for Mac OS
X 10.7 and Safari 5.1.
Resetting this player
Use this procedure to reset all player settings to the factory
default.
Important
Disconnect all components connected to this player before
the operation.
1
Press NET SERVICE
SETUP.
The Initial Setup screen is displayed on the display.
2
Use
/
to select Factory Reset.
3
Select Start.
“Reset?” screen appears. Press ENTER to reset the
system.
All the settings will be reset to the factory default next
time the player is turned on.
Cautions on use
When moving this player
When moving this player, be sure to first disconnect the iPod/
iPhone/iPad, USB storage device, LAN cable or any other
equipment connected to the player. Then press NETWORK,
wait for the power indicator on the front panel display to turn
off, then unplug the power cord. Damage may occur if the
player is transported, or when another device is connected to
the iPod/iPhone connector port, USB, LAN (10/100)
terminals.
Place of installation
Choose a stable place near the TV or stereo system being used
with this player. Do not place this player on top of a TV or color
monitor. Also install it away from cassette decks and other
devices easily affected by magnetic forces.
Avoid the following locations:
Places exposed to direct sunlight
Humid or poorly ventilated places
Extremely hot places
Places exposed to vibrations
Places in which there is much dust or cigarette smoke
Places exposed to soot, steam or heat (kitchens, etc.)
Do not place objects on this player.
Do not place any objects on top of this player.
Do not obstruct the ventilation holes.
Do not use this player on shaggy rugs, beds, sofas, etc., or
wrapped in cloth, etc. Doing so will prevent the heat from
dispersing, leading to damage.
Do not expose to heat.
Do not place this player on top of an amplifier or other
component that generates heat. When rack mounting it, to
avoid the heat given off by the amplifier or other audio
component, place it on a shelf below the amplifier.
Cleaning the product
Unplug the power cord from the power outlet when
cleaning this player.
Clean this player using a soft cloth. For tough dirt, apply
some neutral detergent diluted in 5 to 6 parts water to a soft
cloth, wring out thoroughly, wipe off the dirt, then wipe
again with a soft, dry cloth.
Alcohol, thinner, benzene, insecticides, etc., could cause
the print or paint to peel off. Also, leaving rubber or vinyl
products in contact with this player for long periods of time
could mar the cabinet.
When using chemical-impregnated wipes, etc., read the
cautions included with the wipes carefully.
About copyrights
This item incorporates copy protection technology that is
protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and
disassembly are prohibited.
a
b
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer XN-P02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer XN-P02 in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer XN-P02

Pioneer XN-P02 Quick start guide - English, German - 36 pages

Pioneer XN-P02 User Manual - German - 54 pages

Pioneer XN-P02 Quick start guide - Dutch - 36 pages

Pioneer XN-P02 User Manual - Dutch - 54 pages

Pioneer XN-P02 Quick start guide - French - 36 pages

Pioneer XN-P02 User Manual - French - 54 pages

Pioneer XN-P02 Quick start guide - Italian, Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info