491973
28
Zoom out
Zoom in
Previous page
1/37
Next page
28
En
List of WLAN SETTING items
When [MODE] at [WLAN SETTING] is set to [OFF], only [MODE] and [RESET TO DEFAULT] are displayed.
Setting item 1 Setting item 2 Setting ranges Description
MODE
OFF/ACCESS POINT(AP)*/
WLAN CLIENT
Used to set this unit’s operation mode.
INPUT WPS PINCODE
1
0 to 9 (max. 8 characters)
When in the access point mode, input the PIN code of the sub unit
to be connected to this unit here to authorize connection.
NETWORK SETTING
1
SSID
A to Z, a to z, 0 to 9, symbols
(max. 32 characters)
Used to set this unit’s [SSID].
SECURITY
OPEN / WPA / WPA2 Used to set this unit’s security (encryption) type.
PASSWORD
A to Z, a to z, 0 to 9, symbols
(max. 64 characters)
Used to set this unit’s password.
OTHERS
1
IP ADDRESS
Sets this unit’s IP address.
SUBNET MASK
Sets this unit’s subnet mask.
CHANNEL NO.
CH1 to AUTO*
This unit uses the 2.4 GHz band. If there is a wireless LAN network
on the same band in the area and the waves cause interference,
making connections and communications instable, try changing
the channel manually. (By default, this is set to [AUTO] and a
relatively free channel is selected automatically.)
DHCP SERVER
ENABLE*/DISABLE
Used to set whether or not to enable this unit’s DHCP server
function.
[ENABLE]: Enables the DHCP server function.
[DISABLE]: Disables the DHCP server function.
CHANNEL WIDTH
20 MHz*/40 MHz
Used to set the frequency band’s width.
Only set [40 MHz] when communications are possible by
IEEE802.11n. Otherwise leave this at [20 MHz].
KEY RENEWAL INTERVAL
0minute to 60minute* to
1440minute
When [WPA] or [WPA2] is set at [SECURITY] under [NETWORK
SETTING], the encryption key’s renewal interval can be set.
When this setting is made, the encryption key is renewed automati-
cally at specific intervals, maintaining a more secure status.
RESET TO DEFAULT
YES/NO* Resets the settings at [WLAN SETTING] to the factory defaults.
SELECT SSID
2
Method of selection + input
method
A maximum of 50 receivable networks (SSIDs) in the surrounding
area are displayed. Use [OTHER] at the very bottom to specify an
[SSID] that is not displayed.
DHCP CLIENT
2
ENABLE*/DISABLE
Used to select whether to acquire the network settings automati-
cally using the DHCP function on the connected network side or to
set them manually.
[ENABLE]: Acquire the IP address, subnet mask, etc., automatically.
[DISABLE]: Input the IP address, subnet mask, etc., manually.
IP ADDRESS/SUBNET MASK
000:000:000:000 to
255:255:255:255
(Set to 192:168:1:1/255:255:255:0
upon purchase.)
When in the access point mode, the fixed values below are set.
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
When [DHCP CLIENT] is set to [DISABLE], the values must be input
manually.
*: Setting upon purchase
1 Not displayed in the WLAN client mode.
2 Items marked “**” are not displayed in the access point (AP) mode.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer XDJ-AERO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer XDJ-AERO in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer XDJ-AERO

Pioneer XDJ-AERO User Manual - German - 39 pages

Pioneer XDJ-AERO User Manual - Dutch - 38 pages

Pioneer XDJ-AERO User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info