Manual Pioneer XDJ-AERO (page 25 of 37) (English)

491973

Zoom out

Zoom in

1/37

Advanced Operation

Using the auto mix function

Use this function to automatically play the selected playlist continuously.

When the point 30 seconds before the end of the currently playing track

is reached, the two tracks are crossfaded (when using the SYNC func-

tion) or faded in and out (in other cases), and playback of the next track

starts.

! The track following the first track played when the auto mix function

was turned on is switched to by cutting in.

! When a track that is not included on the playlist is loaded and

played after turning the auto mix function on, repeat playback is set

between one or two tracks.

! The auto mix function cannot be used in the following cases:

— When the [DECK, PHONO/LINE] selector switch on either of the

decks is set to [PHONO/LINE].

— When the sample launch function is being used on either of the

decks.

— When the PC control mode is being used on either of the decks.

! When the auto mix function is turned on, auto cue turns on simulta-

neously. Auto cue cannot be turned off while the auto mix function is

on.

Auto mixing playlists on USB devices

1 Press the [AUTO MIX] button.

The auto mix function turns on.

2 Connect the USB device to the USB device insertion

slot.

3 Press the [

USB] button.

4 Select the playlist to be auto mixed.

5 Load the tracks on the playlist.

! When the [AUTO MIX] button is pressed again, the auto mix func-

tion turns off.

Auto mixing rekordbox (iOS/Android) or

rekordbox (Mac/Windows) playlists

1 Press the [AUTO MIX] button.

The auto mix function turns on.

2 Load the tracks from the rekordbox (iOS/Android) or

rekordbox (Mac/Windows) playlist.

For instructions on loading tracks from rekordbox (iOS/Android) or

rekordbox (Mac/Windows), see Loading tracks from mobile devices or

computers via wireless LAN on page 22.

! When the [AUTO MIX] button is pressed again, the auto mix func-

tion turns off.

Using the sample launch function

Playing sampled sound sources

1 Press the [SAMPLE LAUNCH(BANK)] button.

The sample launch function switches on and the sampled sound

sources are assigned to the [FX SELECT] buttons.

The track currently playing on the deck stops, the sampled sound source

is loaded in its place and cued to the beginning, and the pause mode is

set.

! When the [SAMPLE LAUNCH] button is pressed for the first time

after the power is turned on, [INTERNAL SAMPLES] (this unit’s

internal samples) is selected.

! Playlists on a USB device connected to this unit and the internal

samples preloaded in this unit can be selected as the bank.

! This operation is not possible when the DJ software is being con-

trolled using MIDI messages.

2 Press an [FX SELECT] button.

The sampled sound source assigned to that button is played.

! Sampled sound sources can be operated using this unit’s player

section.

! The maximum length of sampled sound sources is 2 seconds.

! When auto beat loop is turned on while a sampled sound source

is playing, the loop is played at the speed of 120 BPM when the

[TEMPO] slider is at the center position.

! The SYNC function does not work with sampled sound sources.

! The auto cue function does not work with sampled sound sources.

The beginning of the sound is the cue point.

! When the sample launch function is turned off, the track returns to

the track that was loaded before the sample launch function was

turned on.

Using the beat effect function while

sampled sound sources are loaded

! When the sample launch function is on, the beat effect can be

turned on and off by pressing an [FX SELECT] button while pressing

the [SHIFT] button.

! The beat effect is applied according to the BPM of the opposite deck.

Selecting the bank

Playlists on a USB device connected to this unit and the internal sam-

ples preloaded in this unit can be selected as the bank.

The first four tracks in the selected bank are assigned to [FX SELECT]

buttons 1 – 4, and the first two seconds of the four respective tracks can

be played as sampled sound sources.

! The tracks from the fifth track on are not displayed on the bank selec-

tion screen.

! For instructions on creating playlists, see the rekordbox (iOS/

Android) User’s Manual or the rekordbox (Mac/Windows) Operating

Instructions.

! The first two seconds of the first four tracks in the selected playlist

are sampled.

! When rekordbox’s “Extracting loops and outputting them to WAVE

files” function is used, tracks consisting of samples of any desired

section of a track can be created.

For details, see the rekordbox (iOS/Android) User’s Manual or the

rekordbox (Mac/Windows) Operating Instructions.

1 Press the [SAMPLE LAUNCH(BANK)] button for over 1

second.

The bank selection screen appears on the main unit display.

2 Turn the rotary selector to select the bank, then press

the rotary selector.

A list of the tracks in the selected bank is displayed.

3 Turn the rotary selector to select a track in the bank,

then press the rotary selector.

The sample launch function switches on and the sampled sound

sources in the selected bank are assigned to the [FX SELECT] buttons.

Simultaneously, the selected track is loaded as the sampled sound

source and cued to the beginning, and the pause mode is set.

! To re-register the internal sampled sound source at the [FX SELECT]

buttons, select [INTERNAL SAMPLES].

Advanced Operation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer XDJ-AERO in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer XDJ-AERO

Pioneer XDJ-AERO User Manual - German - 39 pages

Pioneer XDJ-AERO User Manual - Dutch - 38 pages

Pioneer XDJ-AERO User Manual - French - 39 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer XDJ-AERO Manual

Product: