491973
10
Zoom out
Zoom in
Previous page
1/37
Next page
10
En
Connections
! Connect the power cord after all the connections between devices have been completed.
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
Refer to the operating instructions for the component to be connected.
! Be sure to use the power cord and AC adapter included with this product.
Connecting the input/output terminals
Rear panel, front panel
USBDC IN MASTER OUT2MASTER OUT1
(
TRS
)
PHONO2 / LINE2
RLR
LINE PHONO
SIGNAL
GND
LRL
LINE PHONO
RL
PHONO1 / LINE1MIC
0dBdB
MIC ATT.
PHONES
1 2 3
4
7 7
5
R
L
R
L
R
L
6 8 a9 b6
DJ
software
c
AC adapter (included)
To audio input terminals
Component, amplifier,
powered speaker, etc.
Microphone
Microphone cable
To
microphone
Audio cable
Audio cable
USB cable
Audio cable
To audio output
terminals
To audio output
terminals
ground wire
To ground
terminals
Analog player
DJ player
Headphones
Headphones
cord
To
headphones
Computer
To power outlet
Power cord (included)
1 Cord hook
Catch the AC adapter’s power cord and USB cable on this hook
when using this unit.
! The sound will be interrupted if the AC adapter or USB cable is
disconnected during playback.
Using the cord hook
Fasten the AC adapter’s power cord and USB cable in place by hooking
them on the cord hook. This prevents the power cord and USB cable
from being accidentally pulled and the plugs from being disconnected
from the terminals.
USBDC IN
USB cable
AC adapter’s power cordCord hook
2 DC IN terminal
Connect the included AC adapter’s DC plug here. Wait until all con-
nections of the equipment are completed before connecting the
power cord.
Be sure to use the power cord and AC adapter included with this
product.
3 USB terminal
Connect to a computer.
! A USB hub cannot be used.
4 MASTER OUT 2 terminals
Connect to a power amplifier, etc.
5 MASTER OUT 1 terminals
Connect powered speakers, etc., here.
Compatible with balanced or unbalanced output for a TRS
connector.
6 LINE, PHONO selector switch
Switches the function of the [PHONO/LINE] terminals.
7 PHONO1/LINE1 and PHONO2/LINE2 terminals
Connect a phono level output device (analog player (for MM car-
tridges), etc.) or a line level output device (DJ player, etc.) here.
Switch the terminals’ function according to the connected device
using the [LINE, PHONO] selector switch on this unit’s rear panel.
8 SIGNAL GND terminal
Connects an analog player’s ground wire here. This helps reduce
noise when the analog player is connected.
9 Kensington security slot
a MIC ATT. control
Adjusts the audio level input to the [MIC] terminal.
! The gain of the sound input to the microphone differs greatly
according depending on the microphone being used. The
[MIC ATT.] control on this unit’s rear panel is used to adjust
the audio level according to the microphone before DJ perfor-
mances. During DJ performances, use the [MIC LEVEL] control
on the top of this unit to adjust the microphone’s volume.
b MIC jack
Connects a microphone here.
c PHONES jacks
Connect headphones here.
Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø
3.5 mm) can be used.
! There are two input jacks, both a stereo phones jack and a mini
phones jack, but do not use both simultaneously. If both are used
simultaneously, when one is disconnected and/or connected, the
volume of the other may increase or decrease suddenly.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer XDJ-AERO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer XDJ-AERO in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer XDJ-AERO

Pioneer XDJ-AERO User Manual - German - 39 pages

Pioneer XDJ-AERO User Manual - Dutch - 38 pages

Pioneer XDJ-AERO User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info