574313
11
Zoom out
Zoom in
Previous page
1/30
Next page
Connecting your equipments
11
En
3 Connect the other ends of the cables to the terminals of
speakers (make sure the positive and negative (+/–)
terminals on the speakers match those on the stereo
receiver).
CAUTION
These speaker terminals carry
HAZARDOUS LIVE voltage
.
To prevent the risk of electric shock when connecting or
disconnecting the speaker cables, disconnect the power
cord before touching any uninsulated parts.
Do not mistake the right and the left channels. The right
speaker is the one on the right side when you face the unit.
• Do not let the bare speaker wires touch each other.
• Make sure that all the bare speaker wire is twisted
together and inserted fully into the speaker terminal. If
any of the bare speaker wire touches the back panel, it
may cause the power to cut off as a safety measure.
Controlling the unit using a remote control of
other Pioneer component
This unit can be controlled using a remote control of other
Pioneer component if the
stereo
receiver is connected to the
component with a monaural mini-plug cord (commercially
available).
Using other subwoofer
You can connect a subwoofer with an amplifier to the
SUBWOOFER OUT socket.
Note
No sound is output from the subwoofer without a built-in
amplifier.
Connecting a network audio device
You can connect a network audio device to the stereo
receiver using a RCA audio cable (commercially available).
Note
• To select NETWORK input;
On remote control: Press the NETWORK button, or press
the INPUT button repeatedly until NETWORK is displayed
in the front panel display.
On stereo receiver: Turn the SOURCE knob until
NETWORK is displayed in the front panel display.
Connecting digital audio device
You can connect a digital audio device to the stereo receiver
using an optical or coaxial cable (commercially available).
Note
To select digital input;
On remote control: Press the DIG IN 1/2 button
repeatedly, or press the INPUT button repeatedly until
DIGITAL IN 1 (for optical input) or DIGITAL IN 2 (for
coaxial input) is displayed in the front panel display.
On stereo receiver: Turn the SOURCE knob until DIGITAL
IN 1 (for optical input) or DIGITAL IN 2 (for coaxial input)
is displayed in the front panel display.
Digital signal formats that can be input to the stereo
receiver include linear PCM signals with sampling rate
and quantitative bits up to 192 kHz/24 bits. (Depending on
the connected device and environment, operation may
not be successful).
ANTENNA
Stereo receiver
(XC-P01 for
example)
Audio cable
(commercially
available)
To audio input
socket
To SUBWOOFER OUT
socket
Commercially
available subwoofer
(amplifier built in)
ANTENNA
ANALOG
RL
AUDIO OUTPUT
Audio cable
(commercially
available)
Stereo
receiver
(XC-P01 for
example)
Network audio player
DIGITAL OUT
DIGITAL OUT
COAXIAL
OPTICAL
Coaxial cable (commercially
available)
Optical cable
(commercially available)
Digital recording device
Stereo receiver
Digital recording device
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer XC-P01-DAB-s-k at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer XC-P01-DAB-s-k in the language / languages: English as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer XC-P01-DAB-s-k

Pioneer XC-P01-DAB-s-k Quick start guide - English, German - 32 pages

Pioneer XC-P01-DAB-s-k User Manual - German - 30 pages

Pioneer XC-P01-DAB-s-k Quick start guide - Dutch - 32 pages

Pioneer XC-P01-DAB-s-k User Manual - Dutch - 30 pages

Pioneer XC-P01-DAB-s-k User Manual - Danish - 86 pages

Pioneer XC-P01-DAB-s-k Quick start guide - French - 32 pages

Pioneer XC-P01-DAB-s-k User Manual - French - 30 pages

Pioneer XC-P01-DAB-s-k Quick start guide - Italian - 32 pages

Pioneer XC-P01-DAB-s-k User Manual - Italian - 30 pages

Pioneer XC-P01-DAB-s-k User Manual - Swedish - 86 pages

Pioneer XC-P01-DAB-s-k Quick start guide - Spanish - 32 pages

Pioneer XC-P01-DAB-s-k User Manual - Spanish - 30 pages

Pioneer XC-P01-DAB-s-k User Manual - Finnish - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info