491911
26
Zoom out
Zoom in
Previous page
1/42
Next page
8
8
26
Internet radio
Connecting using PIN Input
1
Press
NETWORK
SETUP
. Select Network Setting
WPS
PIN Input
, then press
ENTER
.
2
Use
/
to select the access point which you want to
connect, then press
ENTER
.
3
Confirm the PIN code of this receiver, then press
ENTER
.
The PIN code of this receiver is shown on the display.
You must check this PIN code to connect to the network.
4
Within 2 minutes after closing the PIN Code message,
input the PIN Code to the access point selected in step 2.
The connection success or failure is displayed on the
display. The PIN Code input method differs depending on
the LAN device used. For details, consult the operating
instructions accompanying your LAN device.
Connecting to a router without WPS-PBC
function
This section describes how to set the network connection
using Safari browser on a Macintosh computer.
Be sure your computer is equipped with wireless LAN
function. Settings can be performed from the Web browser of
the computer.
1
Be sure the LAN cable is not connected to the receiver.
2
Plug the power cord into an AC outlet. Press
STANDBY/
ON
.
3
Press
NETWORK
SETUP
on the remote control.
4
Select Network Setting
Network Configuration
Wireless
Web Control.
5
Select Start
OK.
The receiver restarts. Change settings on Web Control on
your computer.
6
Select Pioneer Setup (this receiver) in the available
wireless network connection of your computer.
SSID is displayed as Pioneer Setup:xxxxxx. "xxxxxx" is the
lower three bytes of the MAC address.
You can change this receiver's network settings via Safari
browser.
Note
This setting for the network has been confirmed for Mac OS
X 10.7 and Safari 5.1.
7
Launch Safari on your computer.
8
Press Bookmark icon. Click Bonjour list (a), and then
select this receiver's name (Friendly Name) (b) in
Bookmark.
If Bonjour list is not displayed, access the IP address
http://192.168.1.1/ from Safari.
If you use X-HM71 or X-HM81, XC-HM71 or XC-HM81 is
displayed as the receiver's name.
9
Click Network Configuration. Select Auto and then press
OK.
10
Setup the network settings manually and then press
Apply.
If SSID is not displayed, return to step 9 and select
Manual.
The receiver restarts and the new network settings are applied
to the receiver.
002XXXXXX
001XXXXXX
Available Wireless Networks
003XXXXXX
[ENTER]
88192420
Start
000001
000002
000003
XX.XX
:xxxxxx
a
b
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer Xc-HM81 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer Xc-HM81 in the language / languages: English as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer Xc-HM81

Pioneer Xc-HM81 User Manual - German - 42 pages

Pioneer Xc-HM81 User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info