491911
12
Zoom out
Zoom in
Previous page
1/42
Next page
3
3
12
Getting started
10
Use
/
to adjust the volume.
11
Press
ENTER
.
The TIMER indicator lights, and the settings are
confirmed on the display.
12
Press
STANDBY/ON
to enter the power standby mode.
Note
If you select USB function for the wake-up timer, check
there is the playable file in the root folder.
Internet Radio function is not recommended for the wake-
up timer because Internet Radio is not always connected by
the wireless connection.
If Internet Radio function is selected for the wake-up timer,
the last tuned station is selected.
Turning the wake-up timer on/off
If you have already set the wake-up timer, you can switch it on/
off.
1
When the power is on, press and hold
TIMER
button for
two seconds.
2
Press
/
to select ‘
Timer On
’ or ‘
Timer Off
’ within ten
seconds, then press
ENTER
.
When ‘Timer On’ is selected, the timer indicator lights,
and the settings are confirmed on the display.
3
When ‘
Timer On
’ is selected, press
STANDBY/ON
to set
the standby mode.
Configuring the memorised timer setting
The timer setting is memorised once it is entered. To
configure the setting, perform the following operations.
1
When the power is on, press and hold
TIMER
button for
two seconds.
2
Press
/
to select ‘
Timer Call
’ within ten seconds,
then press
ENTER
.
The TIMER indicator lights, and the settings are
confirmed on the display.
Sleep operation
1
Press
SLEEP
to change the amount of time before the
receiver switches into standby (30 min. – 60 min. – 90
min. – Off).
You can check the remaining sleep time at any time by
pressing SLEEP once.
General control
Input function
When pressing INPUT button on the receiver, the current
function will change to different mode. Press INPUT button
repeatedly to select desired function. The selected input is
displayed on the front panel display.
*1 This function is available for X-HM81 and XC-HM81.
*2 This function is available when Parental Lock is OFF.
Note
The backup function will protect the memorised function
mode should there be a power failure or the AC power cord
becomes disconnected.
Network function
When pressing NETWORK button on the remote control, the
current network function will change to different network
mode. Press the NETWORK button repeatedly to select
desired network function. The selected function is displayed
on the front panel display.
*1 This function is available when Parental Lock is OFF.
Listening to auxiliary component
1
Press
AUDIO IN
to select
Audio In
.
Audio In
is shown on the display.
2
Start playback of the auxiliary component.
Headphones
Do not turn the volume on to full at switch on and listen to
music at moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
Before plugging in or unplugging the headphone, reduce
the volume.
Be sure your headphone has a 3.5 mm diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphone disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
Display brightness control
Press DIMMER button to dims the display brightness. The
brightness can be controlled in three steps.
USB CDiPod
Line Audio In
Music Server
Internet Radio
*2
BT Audio (Air Jam)
*1
Favorites
*2
FMAM
Music Server
Internet Radio
*1
Favorites
*1
Audio In
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer Xc-HM81 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer Xc-HM81 in the language / languages: English as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer Xc-HM81

Pioneer Xc-HM81 User Manual - German - 42 pages

Pioneer Xc-HM81 User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info