699685
22
Zoom out
Zoom in
Previous page
1/212
Next page
Bluetooth
®
Audio playback
22
En
09
Chapter 9:
Bluetooth
®
Audio playback
Note
The Bluetooth wireless technology enabled device
must support A2DP profiles.
Connection is not always guaranteed with all Bluetooth-
enabled devices.
Pairing with the unit
1 Press the Í and turn the power to the unit
on.
2 When you press the button on the remote
controller, [PAIRING] is displayed on this unit's
display, and the pairing mode is enabled.
3 Enable (turn on) the Bluetooth function of
the Bluetooth capable device, then select this
unit from amongst the devices displayed. If a
password is requested, enter "0000".
This unit will be displayed as “Pioneer X-SMC02” on all
Bluetooth capable devices that you have.
Please refer to the user’s manual for your Bluetooth
capable device for details on when pairing can be
performed and the procedures required for pairing.
4 The name of the Bluetooth capable device
will be displayed on the front panel of the unit.
Only single-byte alphanumeric characters can be
displayed. Any character that cannot be displayed will
be indicated by a “*”.
Playing Back
1 Press the .
The unit will switch to BT AUDIO input.
2A Bluetooth connection will be created
between the Bluetooth capable device and the
unit.
Procedures for connecting to the unit should be performed
from the Bluetooth capable device. Please refer to the user’s
manual for your Bluetooth capable device for details of the
connection procedures.
3 Playback music from the Bluetooth capable
device. Increase the volume of the Bluetooth
capable device to an appropriate level.
Due to the characteristics of Bluetooth wireless
technology, the sound produced on this unit may
slightly be behind the sound played on the Bluetooth
capable device.
Note
When Bluetooth capable devise is not connected and
no operations have been performed for more than 20
minutes, the unit will automatically power off. In this
case it is required that the Auto power off is switched to
ON.
Auto power off can be switched to ON/OFF (page 10).
BT STANDBY
The following can be done when the unit is on standby
with the BT STANDBY switched ON.
By selecting a Bluetooth capable device that already
has a connection history (pairing has already been
conducted) with this unit, this unit will automatically turn
on with the BT AUDIO function.
BT STANDBY settings
1 Press the .
2 Press MENU and then press
/
until “BT
STY” appears on the display.
3 Press ENTER and then press
/
to switch
BT STANDBY ON/OFF.
It is set to OFF in the factory setting.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer X-SMC02D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer X-SMC02D in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 5,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info