651391
28
Zoom out
Zoom in
Previous page
1/39
Next page
Bluetooth
® Audio playback
28
En
10
Please refer to the user’s manual for your Bluetooth
capable device for details on when pairing can be
performed and the procedures required for pairing.
When PIN code entry is requested, enter “0000”. (This
unit does not accept any PIN code setting other than
0000”.)
4 Confirm on the Bluetooth capable device
that pairing has been completed.
If pairing with the Bluetooth capable device has been
completed correctly, the name of the Bluetooth capable
device will be displayed on the front panel of the unit. (Only
single-byte alphanumeric characters can be displayed. Any
character that cannot be displayed will be indicated by a “*”.)
Listen to music on the unit from a
Bluetooth
capable device
1 Press the
BT AUDIO
.
The unit will switch to BT AUDIO input.
2A Bluetooth connection will be created
between the Bluetooth capable device and the
unit.
Procedures for connecting to the unit should be performed
from the Bluetooth capable device.
Please refer to the user’s manual for your Bluetooth
capable device for details of the connection procedures.
3 Playback music from the Bluetooth capable
device.
Note
When Bluetooth capable devise is not playing and no
operations have been performed for more than 20
minutes, the unit will automatically power off.
Auto power off can be switched to ON/OFF (page 35).
BT STANDBY
The following can be done when the unit is on standby with
the BT AUDIO switched ON.
By selecting a Bluetooth capable device that already has a
connection history (pairing has already been conducted) with
this unit, this unit will automatically turn on with the BT
AUDIO function.
BT STANDBY settings
Switch ON/OFF by long pressing the BT AUDIO button
located on the top of the unit for 3 seconds.
The setting operation can only be performed by using the BT
AUDIO button on the unit. The setting cannot be performed
using the remote control.
Note
When the BT STANDBY is ON, BT STANDBY ON is
displayed on the main display.
When the BT STANDBY is OFF, BT STANDBY OFF is
displayed on the main display.
Connection while in BT STANDBY mode with
Bluetooth
capable device
When connection history (pairing has already been
conducted) with a Bluetooth capable device exists for the unit
during BT STANDBY, the unit can receive a connection
request directly from the connection history.
The unit will start using the BT AUDIO function, and connect
with a Bluetooth capable device.
Even devices that have already been paired with this unit will
not connect during BT STANDBY in the following cases.
In such cases, delete pairing history from the Bluetooth
wireless technology device and perform pairing again.
Up to 8 pairing history can be recorded with this unit. If
connecting to a Bluetooth wireless technology device
over 8 units, the oldest pairing history will be deleted.
If the settings are reset to the factory setting, all pairing
history will be deleted.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer X-SMC01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer X-SMC01 in the language / languages: English as an attachment in your email.

The manual is 3,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer X-SMC01

Pioneer X-SMC01 User Manual - German - 39 pages

Pioneer X-SMC01 User Manual - Dutch - 39 pages

Pioneer X-SMC01 User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info