577749
54
Zoom out
Zoom in
Previous page
1/63
Next page
11
11
54
Additional information
Setting quick start mode
Quick start mode significantly reduces the time required for
startup. It also allows the unit to power on automatically using
AirPlay, DLNA and Spotify application. Follow the steps below
to turn on quick start mode. Power consumption increases
when set to quick start mode when compared to regular
standby mode.
1
Press NET SERVICE, then press SETUP on the remote
control.
The Initial Setup screen is shown on the display.
2
Select ‘Option Setting’ from Initial Setup menu.
3
Select ‘Power Off Setting’ from Option Setting menu.
4
Select ‘Quick Start Mode’ from Power Off Setting menu.
5
To turn Quick Start Mode on, use
/
to select ON, then
press ENTER.
To turn Quick Start Mode off, use
/
to select OFF,
then press ENTER.
Firmware Update
Use this procedure to update the receiver’s software. You can
update the software via a USB storage device.
Updating via a USB storage device is performed by
downloading the update file from a computer, reading this file
onto a USB storage device then inserting the USB storage
device into the USB port on the receiver’s front panel.
If an update file is provided on the Pioneer website, download
it onto your computer. When downloading an update file from
the Pioneer website onto your computer, the file will be in ZIP
format. Unzip the ZIP file before saving it on the USB storage
device. If there are any old downloaded files or downloaded
files for other models on the USB storage device, delete them.
Important
DO NOT unplug the power cord during updating.
When updating via a USB storage device, do not
disconnect the USB storage device.
1
Press iPod/USB to select iPod/USB as the input source.
iPod/USB is shown on the display.
2
Press SETUP.
The Initial Setup screen is displayed on the display.
3
Select Option Setting
Firmware Update
Start,
then press ENTER.
4
To update, select OK.
The updating screen appears and updating starts.
The receiver will reboot when the update is completed,
and the display will show the input function before the
update.
Firmware Update messages
Firmware Update using Web browser
You can update this receiver’s firmware via Web browser.
Download the latest firmware at Pioneer website.
1
Be sure this receiver and your computer are connected
to the same wired or wireless network.
2
Launch Web browser on your computer.
3
Display the Network Setup menu.
For Safari
Press Bookmark icon ( ). Click Bonjour list (a), and
then select this receiver’s name (“Friendly Name”) (b) in
Bookmark.
If Bonjour list is not displayed, access the IP address
“http://(the receiver’s IP address)” from Safari.
Note
The displayed name will change depending on the product
being used.
XC-HM72 *****, XC-HM82 *****, XC-HM72D ***** or XC-
HM82D ***** will be displayed. (“*****” is the lower three
bytes of the MAC address.)
Other than Safari
Enter “http://(the receiver’s IP address)” into your web
browser’s address bar.
Firmware Update
Start
Cancel
Status messages Description
File Not Found.
No update file was found on the USB
storage device. Store the file in the USB
storage device’s root directory.
a
b
XC-HM82
*****
XC-HM82
*****
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer X-HM82-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer X-HM82-K in the language / languages: English as an attachment in your email.

The manual is 10,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer X-HM82-K

Pioneer X-HM82-K Quick start guide - English, German - 36 pages

Pioneer X-HM82-K User Manual - German - 63 pages

Pioneer X-HM82-K Quick start guide - Dutch - 36 pages

Pioneer X-HM82-K User Manual - Dutch - 63 pages

Pioneer X-HM82-K User Manual - Danish - 184 pages

Pioneer X-HM82-K Quick start guide - French - 36 pages

Pioneer X-HM82-K User Manual - French - 63 pages

Pioneer X-HM82-K Quick start guide - Italian - 36 pages

Pioneer X-HM82-K User Manual - Italian - 63 pages

Pioneer X-HM82-K User Manual - Swedish - 184 pages

Pioneer X-HM82-K User Manual - Turkish - 64 pages

Pioneer X-HM82-K Quick start guide - Spanish - 36 pages

Pioneer X-HM82-K User Manual - Spanish - 63 pages

Pioneer X-HM82-K User Manual - Finnish - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info