Manual Pioneer X-HM20 (page 10 of 184) (English, German, Dutch, French, Italian, Spanish)

491925

Zoom out

Zoom in

1/184

11/5/25 X-HM10_20_En.fm

En-10

Setting the clock (Remote control

only) (continued)

To confirm the time display:

Press the CLOCK/TIMER button. The time display will appear

for about 5 seconds.

Note:

When power supply is restored after unit is plugged in again

or after a power failure, reset the clock (page 9).

To readjust the clock:

Perform “Setting the clock” from step 1. If the “Clock” does not

appear in step 2, step 4 (for selecting the 24-hour or 12-hour

display) will be skipped.

To change the 24-hour or 12-hour display:

Note:

The timer setting will reset if the power cord is pulled out

or when there is a blackout.

Listening to the iPod, iPhone or iPad

(X-HM20 only)

Supported iPod, iPhone and iPad models:

iPad

iPhone 4

iPhone 3GS

iPhone 3G

iPhone

iPod touch (4

generation)

iPod touch (3

generation)

iPod touch (2

generation)

iPod touch (1

generation)

iPod classic

iPod nano (6

generation)

iPod nano (5

generation)

iPod nano (4

generation)

iPod nano (3

generation)

iPod nano (2

generation)

Notes:

l This system has been developed and tested for the

software version of iPod/iPhone/iPad indicated on the

website of Pioneer (http://pioneer.jp/homeav/support/

ios/eu).

l Installing software versions other than indicated on the

website of Pioneer to your iPod/iPhone/iPad may result

in incompatibility with this system.

l Charging terminal for iPod, iPhone and iPad:

l The message “This accessory is not made to work with

iPhone” or similar, may appear on the iPhone screen

when:

- battery is low.

- the iPhone is not properly docked (eg. slanting).

if this occure, remove and re-dock the iPhone.

This product is made for iPhone. To prevent random

interference when iPod/iPhone is docked, the

headphone output is disabled and "HP INVALID" will

be displayed.

You may also experience brief audio interference

during incoming calls.

1 Press the STANDBY/ON button to turn the power on.

2 Press the USB button on the remote control or INPUT

button repeatedly on the main unit to select USB

fnction.

3 Connect iPod, iPhone or iPad to the unit. "iPod" will

appear.

4 Press the / (CD/USB / ) button to start playback.

Note:

Stop button ( ) is invalid during iPod, iPhone or iPad

playback.

4 Press the or button to select 24-hour or 12-

hour display and then press the ENTER button.

The 24-hour display will appear.

(00:00 - 23:59)

The 12-hour display will appear.

(AM 12:00 - PM 11:59)

To adjust the hour, press the or button and then

press the ENTER button. Press the or button

once to advance the time by 1 hour. Hold it down to

advance continuously.

To adjust the minutes, press the or button and

then press the ENTER button. Press the or

button once to advance the time by 1 minute.

1 Clear all the programmed contents. [Refer to “Factory

reset, clearing all memory” on page 25 for details.]

2 Perform “Setting the clock” from step 1 onwards.

Condition

Docking

station

USB terminal

USB function NO YES

Other function YES NO

Stand-by YES NO

n iPad connection (USB Terminal)

Insert the connector to the the iPod, iPhone or iPad.

2 Connect the iPad to the unit via USB connector.

Note:

USB connector do not support VIDEO out.

n iPod, iPhone or iPad Playback (USB

Terminal)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer X-HM20 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 65,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer X-HM20 Manual

Product: