651393

Pioneer X-EM16 Manual

11
Zoom out
Zoom in
Previous page
1/104
Next page
English
Français Español
11
En
Listening to the FM radio
Tuning to an FM radio station
• Make sure that you have connected and fully extended the
FM antenna.
∫ Manual tuning
1 Press INPUT on the remote control or INPUT
repeatedly on the main unit to switch the
source to FM.
2 Press MODE repeatedly to select [MANUAL].
3 Press :/9 on the remote control to tune in
to the desired station.
∫ Automatic tuning
1 Press INPUT on the remote control or INPUT
repeatedly on the main unit to switch the
source to FM.
2 Press MODE repeatedly to select [AUTO].
3 Press :/9.
Scanning will start automatically and the tuner will stop at the
first receivable broadcast station.
(For European model only) When you tune to an FM station
that provides RDS services, the service name or station
name appears on the display .
Programming radio stations
• You can program up to 20 preset radio stations.
• To overwrite a programmed radio station, store another
one with its sequence number.
1 Tune to a radio station.
2 Press MEMORY.
3 Press:/9(/) repeatedly to select a
preset number, and then press .
“COMPLETE” appears on the display and the radio station is
registered with the preset number.
4 Repeat steps 1-3 to program more stations.
∫ Tuning to a preset radio station
1 Press INPUT on the remote control or INPUT
repeatedly on the main unit to switch the
source to FM.
2 Press MODE repeatedly to select [PRESET].
3 Press
/
to select the desired preset
number
.
If reception of an FM stereo broadcast is noisy, press ST/
MONO repeatedly to select [MONO] to select monaural
reception. This reduces noise.
Other features
∫ Automatic standby mode
• After this product is kept inactive for 15 minutes, it
automatically switches to the standby mode.
Press and hold
Í
on the remote control or on the main unit.
“AUTO STANDBY ON” or “AUTO STANDBY OFF” is
displayed on the main display, then switches the setting.
The system may not enter standby mode automatically in the
following cases:
• While using the tuner function
• While an audio signal is being detected
• During playback of audio tracks or files
• While the Play Timer or Sleep Timer is being used
The system resets the 15 minute countdown time for
entering standby mode in the following cases:
• When a USB device is connected in USB function
• When a button on the remote or unit is pressed
∫ Turn on and off
automatically
You can set a time for automatic power on and off.
• Make sure that you have set the clock before this setup.
1Press TIMER.
2Press / to select [PLAY SET], then press
.
[ON TIME] appers,and the hour digits blink.
3Press / to set the hour of
ON TIME
, then
press .
The minute digits blink.
4Press / to set the minute, then press .
[OFF TIME] appers,and the hour digits blink.
5Press / to set the hour of
OFF TIME
, then
press .
The minute digits blink.
6Press / to set the minute, then press .
7Press / to select the source, then press
.
CD, USB and FM can be selected as the playback source.
• It is possible to move cursor between “hour” and
“minute” settings by
:
/
9
.
To check the setting
1Press TIMER.
2Press / to select [SELECT], then press
.
3Press / to select [PLAY SEL], then press
.
To cancel the timer
1Press TIMER.
2Press / to select [SELECT], then press
.
3Press / to select [OFF], then press .
∫ Setting the sleep timer
In the working mode, press SLEEP repeatedly to select a
preset period (10, 20, 30, 40, 50, 60, 70, 80, 90 minutes or
AUTO).
• To deactivate the sleep timer, press SLEEP repeatedly
until [OFF] is displayed.
SN29402702_X-EM16_26_En(Europe).book 11 ページ ２０１６年８月６日　土曜日　午後３時１２分
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer X-EM16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer X-EM16 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info