Manual Pioneer X-CM56D (page 28 of 244) (English, German, Dutch, French, Italian, Spanish)

651387

Zoom out

Zoom in

1/244

Bluetooth

Audio playback

Pairing and connection using NFC

NFC stands for Near Field Communication.

If a NFC-

equipped smartphone is placed close to the unit, Bluetooth

pairing and connection can easily be established.

For

details, refer to the user manual for the NFC-equipped

device.

Note

• Supported OS: Android 4.1 and above

• This may not operate properly, depending on the

smartphone or tablet device.

• This unit automatically turns on if an NFC-equipped

smartphone is held over the NFC area when BT

STANDBY is set to ON.

• The N Mark is a trademark or registered trademark of

NFC Forum, Inc. in the United States and in other

countries.

• Android is a trademark of Google Inc.

1 Hold the device to be connected over the

NFC area on the front panel of the unit.

When an NFC-equipped smartphone is detected, the input

automatically switches to

Bluetooth

2 Pairing automatically begins.

When an NFC-equipped smartphone is detected, Pairing

displays on the front panel display.

• Do not move the NFC-equipped smartphone until a

response such as message display can be confirmed

on the device. Remove the device after a response is

confirmed on the device.

• If a connection does not start, change the position to

hold the NFC-equipped smartphone over this unit.

3 Once connection with the NFC-equipped

smartphone is completed, the device name is

displayed on the front panel display of this unit.

4 Start playback of the music from the NFC-

equipped smartphone.

Note

• Only one device can be connected at a time.

•

NFC can also be used to quickly cancel a

Bluetooth

connection. If you perform Step 1 using a NFC-

equipped smartphone that is already connected via

Bluetooth

, the connected will be cancelled.

• If another NFC-equipped smartphone is held over the

NFC area, this unit connects to the device via

Bluetooth. The connection with the previously

connected device is terminated.

Radio wave caution

This unit uses a 2.4 GHz radio wave frequency, which is a

band used by other wireless systems (see list below). To

prevent noise or interrupted communication, do not use this

unit nearby such devices, or make sure these devices are

switched off during use.

• Cordless phones

• Cordless facsimiles

• Microwave ovens

• Wireless LAN devices (IEEE802.11b/g)

• Wireless AV equipment

• Wireless controllers for game systems

• Microwave-based health aids

• Some baby monitors

Other, less common, equipment that may operate on the

same frequency:

• Anti-theft systems

• Amateur radio stations (HAM)

• Warehouse logistic management systems

• Discrimination systems for train or emergency vehicles

Note

• In the event noise appears in your television image,

there is the possibility that a Bluetooth wireless

technology enabled device or this unit (including

products supported by this unit) are causing signal

interference with the antenna input connector of your

television, video, satellite tuner, etc. In this event,

increase the distance between the antenna input

connector and the Bluetooth wireless technology

enabled device or this unit (including products

supported by this unit).

• If there is something obstructing the path between this

unit (including devices supported by this unit) and the

device equipped with Bluetooth wireless technology

(such as a metal door, concrete wall, or insulation

containing tinfoil), you may need to change the location

of your system to prevent signal noise and interruptions.

SN29402593_X-CM56&56D_En.book 28 ページ２０１６年５月２７日　金曜日　午後３時４７分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer X-CM56D in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer X-CM56D Manual

Product: