491888
4
Zoom out
Zoom in
Previous page
1/32
Next page
4
En
PORTABLE
/
MCACC
SETUP
MICPHONES
STANDBY/ON
Basic setup
Automatically setting up for surround sound (MCACC)
CAUTION
• The test tones used in the Auto MCACC setup are
output at high volume.
Note
• The subwoofer distance setting may be farther
than the actual distance from the listening
position. If this is the case, perform settings
manually.
"Speaker Distance"
Change the X.OVER setting
For S-HV600B/S-HV500-LR/S-SL100-LR/S-SL100CR
speakers
1
Select ‘Manual SP Setup’ from the
Home Menu, then press ENTER.
2
Select ‘X.OVER’ from the Manual SP Setup
menu, then press ENTER.
2.Manual SP Setup
Return
a.Speaker System
b.Speaker Setting
c.X.OVER
d.Channel Level
e.Speaker Distance
3
Choose ‘200 Hz’ for the frequency cutoff
point.
2c.X.OVER
Return
Frequency 200Hz
4
When you’re fi nished, press RETURN twice.
You return to the Home Menu.
1
Switch on the receiver and your TV.
2
Switch the TV input so that it connects to the receiver.
3
Connect the microphone to the MCACC SETUP MIC jack on the front panel.
Make sure there are no obstacles between the speakers and the microphone.
If you have a tripod, use it to place the microphone so that it’s about ear level at your normal listening position.
Otherwise, place the microphone at ear level using a table or a chair.
4
Press
RECEIVER
on the remote control, then press the HOME MENU button.
The Home Menu appears on your TV. Use

and
ENTER
on the remote
control to navigate through the screens and select menu items. Press
RETURN
to exit
the current menu.
• Since the S-HV600B/S-HV500-LR/S-SL100-LR/S-SL100CR are designed as compact
satellite speakers, it is recommended that they be used in combination with a
subwoofer to provide full base sound. In this case, set the
X.OVER
to 200 Hz here
(see "Change the X.OVER setting" on this page).
5
Select ’Auto MCACC’ from the Home Menu, then press ENTER.
Mic In!
blinks when the microphone is not connected to MCACC SETUP MIC jack.
Try to be as quiet as possible after pressing
ENTER
. The system outputs a series of
test tones to establish the ambient noise level.
6
Follow the instructions on-screen.
• When using a powered subwoofer, make sure the subwoofer is on and the volume
is turned up.
7
Wait for the test tones to fi nish.
A progress report is displayed on-screen while the receiver outputs test tones to
determine the speakers present in your setup. Try to be as quiet as possible while it’s
doing this.
• For correct speaker settings, do not adjust the volume during the test tones.
8
Confi rm the speaker confi guration.
The configuration shown on-screen should reflect the actual speakers you have.
• With error messages (such as
Too much ambient noise
) select
RETRY
after
checking for ambient noise.
If the speaker configuration displayed isn’t correct, use

to select the speaker and

to change the setting. When you’re finished, go to the next step.
If you see an error message (
ERR
) in the right side column, there may be a problem
with the speaker connection. If selecting
RETRY
doesn’t fix the problem, turn off the
power and check the speaker connections.
9
The Auto MCACC setup has fi nished! You return to the Home Menu.
Make sure the setup microphone is disconnected.
The settings made in the Auto MCACC setup should give you excellent surround
sound from your system, but it is also possible to adjust these settings manually
using the Manual speaker setup.
"Manual speaker setup"
Canceling the Auto Power Down
When this receiver is not used over a period of several hours, it will power down
automatically. The automatic power-off timer is set to six hours under factory settings,
and the timing can be changed or the power-off function switched off altogether.
"The Auto Power Down menu"
Canceling the demo display
The display on the front panel shows various information (demo displays) when the
receiver is not operating.
You can turn off the demo display.
"The FL Demo Mode menu"
• The demo mode is canceled automatically when the Auto MCACC setup is
performed (see below).
The Auto Multi-Channel Acoustic Calibration (MCACC)
setup measures the acoustic characteristics of your
listening area, taking into account ambient noise,
speaker size and distance, and tests for both channel
delay and channel level. After you have set up the
microphone provided with your system, the receiver
uses the information from a series of test tones to
optimize the speaker settings and equalization for your
particular room.
iPod
USB
NETWORK
STANDBY/ON
AUTO
/
DIRECT
ALC
/
STANDARD
ADV
SURR
SOUND
WING
ADAPTER
TUNER BD DVD
CD
STB GAME
TV
PORTABLE
RECEIVER
ECO
D AUX A AUX
S.RTRV
AUDIO DISP
DIMMER
TOP
MENU
MENU
TOOLS
VOL
RETURN
PTY
PRESET
BAND MUTE
HOME MENU
iPod
CTRL
STATUS
SLEEP SP-AB
ENTER
TUNE
Microphone
Tripod
Home Menu
1.Auto MCACC
2.Manual SP Setup
3.Pre Out Setting
4.Input Assign
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
1.Auto MCACC
Now Analyzing
Environment Check
Ambient Noise
Speaker YES/NO
Return
1.Auto MCACC
Check!
OK
Return
10:Next
Front
Center
Surr
Surr. Back
Subwoofer
[ YES ]
[ YES ]
[ YES ]
[
---
]
[ YES ]
PORTABLE
/
MCACC
SETUP
MICPHONES
STANDBY/ON
VSX-S500_SYXCN_QSG_設変book.indb 4VSX-S500_SYXCN_QSG_設変book.indb 4 2012/04/23 14:40:002012/04/23 14:40:00
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-S500-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-S500-S in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 18,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-S500-S

Pioneer VSX-S500-S User Manual - English - 56 pages

Pioneer VSX-S500-S User Manual - German - 56 pages

Pioneer VSX-S500-S User Manual - Dutch - 56 pages

Pioneer VSX-S500-S User Manual - Danish - 150 pages

Pioneer VSX-S500-S User Manual - French - 60 pages

Pioneer VSX-S500-S User Manual - Italian - 56 pages

Pioneer VSX-S500-S User Manual - Swedish - 150 pages

Pioneer VSX-S500-S User Manual - Spanish - 56 pages

Pioneer VSX-S500-S User Manual - Norwegian, Finnish - 150 pages

Pioneer VSX-S500-S User Manual - Finnish - 150 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info