491889
5
Zoom out
Zoom in
Previous page
1/32
Next page
English
Français
Italiano
Español
Nederlands
Deutsch
5
En
Basic playback
Here are the basic instructions for playing a source (such as a Blu-ray Disc) with your home theater system.
1
Switch on your system components and receiver.
Start by switching on the playback component (for example a Blu-ray Disc player), your TV and subwoofer (if you
have one), then the receiver (press
STANDBY/ON
).
2
Switch the TV input to the input that connects this receiver.
For example, if you connected this receiver to the
VIDEO
jacks on your TV, make sure that the
VIDEO
input is now
selected.
3
Press input function buttons to select the input function you want to play.
• The input of the receiver will switch over, and you will be able to operate other components using the remote
control.
• The input source can also be selected by using the front panel
INPUT SELECTOR
button. In this case, the remote
control won’t switch operational modes.
4
Press AUTO/DIRECT to select ’AUTO SURR’ and start playback of the source.
If you’re playing a Dolby Digital or DTS surround sound Blu-ray/DVD disc, with a digital audio connection, you
should hear surround sound. If you’re playing a stereo source or if the connection is an analog audio connection,
you will only hear sound from the front left/right speakers in the default listening mode.
RECEIVER
STANDBY/ON
iPod
USB
NETWORK
AUTO
/
DIRECT
ALC
/
STANDARD
ADV
SURR
SOUND
WING
AUDIO
DIMMER
TOP
MENU
MENU
TOOLS
VOL
RETURN
PTY
PRESET
BAND MUTE
HOME MENU
iPod
CTRL
DISP
STATUS
ADAPTER
TUNER BD DVD
CD STB GAME
TV
PORTABLE
SLEEP SP-AB
ENTER
TUNE
RECEIVER
ECO
D AUX A AUX
S.RTRV
1
4
3
7
6
A
5
B
Listening in Standard surround sound
This receiver provide basic surround sound for stereo and multichannel sources.
While listening to a source, press ALC/STANDARD repeatedly to select a listening mode.
Listening in Advanced surround sound
The Advanced surround effects can be used for a variety of additional surround sound effects.
While listening to a source, press ADV SURR repeatedly to select a listening mode.
Listening in Sound Wing mode
HVT speakers make it possible to enjoy a broader-ranging sound.
While listening to a source, press SOUND WING to select the SOUND WING mode.
5
Use VOL +/– to adjust the volume level.
• Sound can be switched off by pressing
MUTE
button.
6
Enjoy a variety of sounds.
Press ECO to select the Ecology mode.
• Select the Ecology mode for Stereo (max. 2.1 ch) playback to enable the reduction of power consumption to a
maximum of half normal levels.
Press S.RTRV to switch the Sound Retriever feature ON or OFF.
• When audio data is removed during the compression process, sound quality often suffers from an uneven
sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound
back to compressed 2-channel audio by restoring sound pressure and smoothing jagged artifacts left over after
compression.
Other remote control functions
• Switch to one of the underlined devices to use the remote control to operate that device. To operate the receiver,
first press
RECEIVER
(
7
)
, then press the appropriate button to operate.
Use the "A" buttons to adjust the settings of this receiver and operate other devices.
Use the "B" buttons to operate other devices. Operations are still possible even after pressing the
RECEIVER
button.
Listening to the radio
1
Press TUNER to select the tuner.
If necessary, press
BAND
to change the band (FM or AM),
2
Press
TUNE+/–
(or

) to tune to a station.
• Press and hold
TUNE+/–
(or

) for about a second. The receiver will start searching for the next station.
If you’re listening to an FM station but the reception is weak, press
BAND
to select
FM MONO
and set the receiver
to the mono reception mode.
Saving station presets
If you often listen to a particular radio station, it’s convenient to have the receiver store the frequency for easy recall
whenever you want to listen to that station.
1
Press TOOLS while receiving a signal from the station you want to store.
The preset number is blinking.
2
Press PRESET+/– (or

) to select the station preset you want, then press ENTER.
The preset number stop blinking and the receiver stores the station.
Listening to station presets
You will need to have some presets stored to do this.
Press PRESET+/– (or

) to select the station preset you want.
© 2012 PIONEER CORPORATION.
All rights reserved.
• The following buttons are not used with this receiver:
iPod USB
,
NETWORK
,
, ,
iPod CTRL
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-S300-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-S300-S in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-S300-S

Pioneer VSX-S300-S User Manual - English - 36 pages

Pioneer VSX-S300-S User Manual - German - 36 pages

Pioneer VSX-S300-S User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info